8. Pin Description
SFP Transceiver Electrical Pad Layout | Host Board Connector Pad Layout |
Pin Function Definitions
Pin Num. | Name | Function | Plug Seq. | Notes |
1 | VeeT | Transmitter Ground | 1 | Note (1) |
2 | TX Fault | Transmitter Fault Indication | 3 | Note (2) |
3 | TX Disable | Transmitter Disable | 3 | Note (3) |
4 | Module Definition 2 | 3 | Note (4), 2 wire serial ID interface | |
5 | Module Definition 1 | 3 | Note (4), 2 wire serial ID interface | |
6 | Module Definition 0 | 3 | Note (4), Grounded in Module | |
7 | Rate Select | Not Connect | 3 | Function not available |
8 | LOS | Loss of Signal | 3 | Note (5) |
9 | VeeR | Receiver Ground | 1 |
|
10 | VeeR | Receiver Ground | 1 |
|
11 | VeeR | Receiver Ground | 1 |
|
12 | RD- | Inv. Received Data Out | 3 | Note (6) |
13 | RD+ | Received Data Out | 3 | Note (6) |
14 | VeeR | Receiver Ground | 1 |
|
15 | VccR | Receiver Power | 2 | Note (7) |
16 | VccT | Transmitter Power | 2 | Note (7) |
17 | VeeT | Transmitter Ground | 1 |
|
18 | TD+ | Transmit Data In | 3 | Note (8) |
19 | TD- | Inv. Transmit Data In | 3 | Note (8) |
20 | VeeT | Transmitter Ground | 1 |
|
Plug Seq.: Pin engagement sequence during hot plugging.
6 | Revision: S1 |
| 03/12/2007 |
DELTA ELECTRONICS, INC. | www.deltaww.com |