Delta Electronics LCP-10G3B4EDR manual Operating Ranges Tc = -5to, Oma, RIN20OMA

Page 3

LCP-10G3B4EDR

Operating Ranges (Tc = -5℃to 70℃)

	Multimode Fiber Type	Min.Modal	Opterating	Maximum Channel
		Bandwidth	Opterating	Maximum Channel
		Bandwidth	Range(m)	Insertion Loss (dB)
		(MHz*km)	Range(m)	Insertion Loss (dB)
		(MHz*km)
	62.5um MMF OM1	160/500	0.5 to 220	1.9
	50um MMF OM2	500/500	0.5 to 220	1.9
	50um MMF OM3	1500/500	0.5 to 220	1.9

Optical Transmitter Characteristics (TC = -5℃to 70℃)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Data Rate	R		10.3125		Gb/s
Signaling speed variation from nominal.				±100	ppm
Average Output Power	Pavg	-6.5		0.5	dBm
Wavelength	λ	1260		1355	nm
RMS Spectral Width at 1260nm				2.4	nm
RMS Spectral Width between 1260nm and 1300nm				Figure 1	nm	1
RMS Spectral Width between 1300nm and 1355nm				4	nm
Extinction Ratio	ER	3.5
Optical Modulation Amplitude	OMA	-4.5		1.5	dBm
RIN20OMA	RIN			-128	dB/Hz
Transmitter eye mask definition		{0.25, 0.40, 0.45, 0.25, 0.28, 0.40}
{X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.40, 0.45, 0.25, 0.28, 0.40}
{X1, X2, X3, Y1, Y2, Y3}
Notes:
1. Refer to the spectral limits curve in Figure 1.
Transmitter eye mask definition

3	Revision: 0B
	2008/9/5
DELTA ELECTRONICS, INC.	www.deltaww.com

Image 3

Contents Applications DescriptionLow Speed Electrical Characteristics Absolute Maximum RatingsRecommended Operating Conditions RIN20OMA Optical Transmitter Characteristics TC = -5toOperating Ranges Tc = -5to OMALOS a Optical Receive Characteristics Tc = -5toRSO LOS DPin Logic Symbol Name/Description ‧ Modabs ‧ Rxlos Low speed electrical control pins and 2-wire interfaceTXFault TXDisableModabs Recommend Circuit Schematic Latch Color Identifier Package Outline Drawing for Metal Housing with Bail de-latchRS1FC Parameter Symbol Min Max UnitTiming parameters for SFP+ management TBDEnhanced Digital Diagnostic Interface Eeprom Serial ID Memory Contents 2-Wire Address A0h Address Name Value Dec Unit Bytes Digital Diagnostic Monitoring InterfaceState/ Control Bits Optional Set of Alarm and WarningRegulatory Compliance Feature Test Method Reference Performance