Delta Electronics SFBD-155E2J1RM manual Absolute Maximum Ratings, Recommended Operating Conditions

1.20

1.00

0.80

0.50

0.20

0.00 -0.20

SFBD-155E2J1RM

1. Absolute Maximum Ratings

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40		85	ºC
Storage Ambient Humidity	HA	5		95	%
Power Supply Voltage	VCC	-0.5		5	V
Signal Input Voltage		-0.3		Vcc+0.3	V
Optical Input Power (Peak)				0	dBm
Lead Soldering Temperature	TSOLD			260	ºC
Lead Soldering Time	tSOLD			10	sec

2. Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Ambient Operating Temperature	TA	0		70	ºC	Without air flow
Ambient Humidity	HA	5		85	%	Non-condensing
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Power Supply Current	ICC			230	mA
Power Supply Noise Rejection				100	mVp-p	100Hz to 1MHz
Data Rate		10		155.52	Mbps
Transmission Distance				15	km

3. Optical Specification of Transmitter

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Average Launched Power	PO	-14	-11	-8	dBm	Note (1)
Launched power (Peak.)				-5	dBm
Extinction Ratio	ER	8.5			dB
Center Wavelength	λC	1260	1310	1360	nm
Spectrum Width (RMS)	σ			6	nm
Optical Rise/Fall Time	tr/tf			1.3	ns	Note (2)
Total Jitter	tJ			1	ns	Note (3)
Optical Transmitter Reflectance				-14	dB
Optical Return Loss Tolerance	ORLT			14	dB
Relative Intensity Noise	RIN			-116	dB/Hz
Output Eye Mask	Compliant with Bellcore TR-NWT-000253					Note (4)
	and ITU recommendation G.957

Note (1). Launched power (avg.) is power coupled into a 9/125um single mode fiber. Note (2). These are unfiltered 20-80% values.

Note (3). Measure at 223-1 NRZ PRBS pattern. Note (4). Eye Mask definition

Amplitude

Mean level of logical "1"

Mean level of logical "0"

0.00	0.15	0.35	0.65	0.85	1.00
			Time
Optical Pulse Mask with Bessel Filter Specified in ITU-T G.957

2	Revision: S0
	12/20/2006
DELTA ELECTRONICS, INC.	www.deltaww.com