Delta Electronics TP-PCC01 specifications （ ）, Introduction, Electrical Specifications

Page 1

Warning

ENGLISH

￿TP-PCC01 doesn’t support plug and play function. Please turn off power before plugging.

￿The voltage for TP-PCC01 is supplied from TP extension slot. Please ensure that plug direction is correct when connecting TP-PCC01 to TP extension slot in case danger and damage on the device may occur.

￿Introduction

Model Name Explanation

Program Copy Card

Series

￿Electrical Specifications

Model Name

TP-PCC01

Item

 

Data Reserved Life / Times for

20 years / one hundred thousand times

Writing In

 

 

 

Operation Temperature

0ºC ~ 55ºC

Weight / Dimensions

6g / 50.85×19.8×10 mm

 

 

￿Program Copy Card Functions

Compatible firmware version: TP05G/TP08G (V1.00 and above)

Using program copy card functions can copy the whole system parameters and application programs set in one TP05G/TP08G to another TP05G/TP08G rapidly. It can save much time and manpower. The operation is described in the following sections.

TP-PCC01 : Program Copy Card

TP

: Terminal Panel (TP05G/TP08G Series)

Step

1

2

3

4

TP￿TP-PCC01

(Copy TP program to TP-PCC01)

Turn the switch on the TP-PCC01 to

TP￿TP-PCC01

Insert the TP-PCC01 into the extension slot of TP

Apply power to TP

￿If the model type of TP does not match the model type of the program set in TP-PCC01:

(TP05G program and TP08G program can’t be compatible with each other. It means that TP05G program can’t be opened and edited by TP08G, and TP08G program can’t be opened and edited by TP05G either.)

TP will display:

TP series and TP-PCC01 is different

Press Enter to Confirm

TP series￿TP-PCC01

Press Esc to Exit

Press CLR to Erase TP-PCC01

TP-PCC01￿TP

(Copy program in TP-PCC01 to TP)

Turn the switch on the TP-PCC01 to

TP-PCC01￿TP

Insert the TP-PCC01 into the extension slot of TP

Apply power to TP

￿If there is no program in TP-PCC01. TP will display:

The TP-PCC01 is Empty TP-PCC01 ￿ TP series is illegal

5

6

￿Remove the program TP will display:

TP-PCC01 will be Erased! Press Enter to Confirm Press ESC to Exit

￿If the model type of TP and the model type of the program set in TP-PCC01 is matched.

TP will display:

Press Enter to Confirm

TP series￿TP-PCC01

Press Esc to Exit

Press CLR to Erase TP-PCC01

Press <Enter> key to confirm the “writing in” operation.

￿When executing “writing in” operation, TP will display:

TP series ￿TP-PCC01

Please wait!

￿“Writing in” operation is completed. TP will display:

Please Remove the TP-PCC01 and

Reboot

Please turn the power of TP off and remove

TP-PCC01 from TP. At this time, all TP programs and system parameters have been copied to TP-PCC01.

Turn the power of TP off and then remove

TP-PCC01 when the message “Please Remove the TP-PCC01 and Reboot” displays on the screen of TP.

￿If the model type of TP does not match the model type of the program set in TP-PCC01.

TP will display:

TP series and TP-PCC01 is different Please Remove the TP-PCC01 and Reboot

￿If the model type of TP and the model type of the program set in TP-PCC01 is matched.

TP will display:

Press Enter to Confirm

TP-PCC01 ￿TP series

Press Esc to Exit

Press <Enter> key to confirm the “writing in” operation.

￿When executing “writing in” operation, TP will display:

TP-PCC01 ￿TP series

Please wait!

￿“Writing in” operation is completed. TP will display:

Please Remove the TP-PCC01 and

Reboot

Please turn the power of TP off and remove

TP-PCC01 from TP. At this time, all programs and system parameters stored in TP-PCC01 have been copied to TP.

Turn the power of TP off and then remove

TP-PCC01 when the message “Please Remove the TP-PCC01 and Reboot” displays on the screen of TP.

￿Dimension and Installation

Units: mm

（ ）

Note:

To avoid damage to TP-PCC01, when installing TP-PCC01 into TP, please pay particular attention to the installation direction of TP-PCC01 and ensure that the side which there is a switch on it should be up and toward the user.

Page 1 Page 1
Image 1
Page 1 Page 1
Contents Dimension and Installation Electrical Specifications（ ） Introduction

TP-PCC01 specifications

Delta Electronics, a global leader in power and thermal management solutions, has introduced the TP-PCC01, a cutting-edge product designed to meet the evolving demands of modern electronic setups. This innovative device is primarily aimed at enhancing power management efficiency in various applications, including industrial automation, smart buildings, and electric vehicle charging infrastructures.

At its core, the TP-PCC01 boasts advanced power conversion technology, allowing for a high level of efficiency during operation. This technology not only reduces energy waste but also minimizes thermal losses, making it an environmentally friendly choice for power management. The device integrates seamlessly with Delta's extensive lineup of energy-efficient solutions, ensuring reliable performance across a variety of platforms.

One of the standout features of the TP-PCC01 is its compact design. The small footprint of the device allows for easy installation in tight spaces, making it ideal for environments where space is at a premium. This is particularly beneficial in industrial applications, where equipment density can be a significant concern.

In terms of connectivity, the TP-PCC01 is equipped with multiple input/output options, supporting a range of industry-standard communication protocols. This flexibility allows for integration with existing systems, facilitating interoperability with various devices and platforms. Users can easily monitor and manage power consumption, enhancing overall operational efficiency.

Safety is a top priority in the design of the TP-PCC01. The device features built-in protection mechanisms, including overvoltage, overcurrent, and thermal protection, ensuring that it operates safely under a variety of conditions. This robust safety framework not only protects the device but also safeguards connected equipment, reducing the risk of potential downtime caused by unforeseen electrical issues.

Additionally, the TP-PCC01 is designed with future-proofing in mind. Its modular approach allows for easy upgrades, accommodating new technologies and standards as they emerge. This adaptability positions the TP-PCC01 as a long-term investment for businesses looking to stay ahead in a rapidly changing technological landscape.

In summary, the Delta Electronics TP-PCC01 represents a significant advancement in power management technology, combining efficiency, safety, and flexibility in a compact package. Its innovative features make it an ideal choice for various applications, ensuring that users benefit from reliable performance and enhanced energy efficiency in their operations.
Top Page Image Contents