OPERATING INSTRUCTIONS: | 6 |
n
IDi
~
FIG.1
5
1.POWER SWITCH:
Press to switch amplifier on.
2.FM ANTENNA BOOSTER SWITCH: Press the switch to improve FM reception.
The switch works independently even when power switch off.
3.HOLD SWITCH:
Press the switch to light up all the LED indicator built in the shaft of slide equalizer control. (Scan/Level switch at "SCAN" position).
4.SCAN/LEVEL SWITCH:
When switch set at "SCAN" position, the LEOs built in each slide control scan automatically from left to right over each frequency points. (Hold switch at "OFF" position) when switch set at "LEVEL" position, the LEOs built in each slide control give visual indication of output power radiating from midpoint of frequencies.
5.ACRYLIC COVER:
Remove the acrylic cover for adjustment of slide control
6.EQUALIZER CONTROLS:
10 band frequency control, slide the knobs up to boost the signal, slide down to attenuate. The signal is unaffected at center position.
2