4. Quick Installation and Set Up:
Open the battery compartment located underneath the keyboard and install the 2 AAA batteries. Note the polarity signs in the battery compartment.
Open the battery compartment located underneath the mouse and install the 2 AAA batteries. Note the polarity signs in the battery compartment.
Turn on the power to your computer and make sure your Windows operating system is active.
Install the Software CD Driver that has been included and you may now go on to section
Insert the USB Receiver into an available USB port. Your computer will recognize the USB device and make the proper settings to enable you to operate your keyboard and mouse. Click on any key on your keyboard to connect with the receiver. Move the mouse over the surface to establish a connection with the receiver.
1)If the mouse and/or keyboard do not work, please see the Troubleshooting information on page 9 of this manual.
2)Caution: Before your mouse and keyboard can be connected, you need to position the devices within 6 feet of the receiver to establish the initial connection.