Compaq HW191 user manual Making Connections, Connecting to a PC

Page 10

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the procedure below.

1.Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

2.Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s DVI-D port.

3.Connect the audio cable between the monitor's audio input and the PC's audio output (green port).

4.Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.

5.Turn on your monitor and computer.

Figure.2. Connecting to a PC

1.	VGA Input	2.	DVI-D Input (optional)
3.	Audio Input	4.	Power AC Input

10

Image 10

Contents

Inch Wide Screen TFT LCD Monitor USER’S ManualUser’s Manual CanadaEnergy CongratulationsErgonomics EmissionsRecycling Information Table of Contents Safety Notice PrecautionsSpecial Notes on LCD Monitors Checking the Contents of the Package FeaturesBefore YOU Operate the Monitor Power Installation InstructionsInstallRemove Connecting to a PC Making ConnectionsAdjusting the Viewing Angle Figure.3. monitor’s angleGeneral Instructions Operating InstructionsControl Panel Buttons Front Panel Control Menu / EnterMain Menu HOW to Adjust a SettingImage Setting Function DescriptionOSD Setting Color SettingOSD Other Setting DDC/CIPlug & Play DDC2B Feature Plug and PlayProblem & Question Possible Solution Technical Support FAQFor General Problems Select PropertiesSettingsScreen ResolutionCable not Connected Error Message & Possible SolutionsTiming Mode Input not SupportVesa DDC2BTM EPA Energy SpecificationsAppendix Star