Compaq 10/100 setup guide @9 !6!6292 424# @,?93

@9 !￿￿￿￿￿￿￿￿￿￿￿6!￿6￿￿(￿￿￿￿￿￿￿￿￿(￿2￿￿￿￿￿￿￿￿￿9￿2

￿9 !￿￿￿￿￿￿￿.￿￿￿￿￿￿￿￿￿￿￿￿,￿4￿￿2￿￿￿￿￿￿4￿￿￿￿#!￿￿

￿￿￿:,.:￿￿￿￿￿￿￿￿￿￿￿(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿'2￿￿￿￿￿

￿￿￿￿"￿!￿￿￿"￿￿.￿@￿￿￿￿￿￿￿￿,￿￿￿￿>￿￿￿￿￿￿￿￿￿￿￿￿?9￿3

Note: The cable length between your Ethernet Switch and hub/PC should not exceed 100 meters. If you will operate at 10 Mbps speed, use a Category 3 or 5 cable. If you will run your network at 100 Mbps, use a Category 5 cable or better.

Note: Any type of hub or PC can connect to your Ethernet Switch by using straight-through wires (not included). You can connect your Ethernet Switch to other hubs or switches using any port as an uplink port, increasing the number of PCs you can add to your network.

IPAQ NETWORKING 5 PORT 10/100 FAST ETHERNET AUTO SENSING SWITCH 11