Chief Manufacturing B1, C1, RPAA1 installation instructions Attaching Projector Security Legs

RPAA1, B1, C1	Installation Instructions
	2
	(T) x 4
	(U) x 4
4
	3
	Figure 7
	Attaching Projector to Security Mount Drawer

Figure 5	1. Align projector and security mount drawer so that the
	projector is oriented correctly.

Attaching Projector Security Legs

1.Attach the projector security legs (R) to the projector, using the correct size screws and washers for your specific projector. (See Figure 6)

x 4

(M) or (N) x 4

(R) x 4

Projector

2.Remove the paper backing from the adhesive washers (V) and attach projector to drawer using adhesive washers (V) and thumbnuts (P) over the security legs (R). (See Figure 8)

(P) x 4

(V) x 4

Security

Legs (R)

Projector

Figure 8

3.Slide the security mount drawer into the RPAA1 outer sleeve. (See Figure 9)

Figure 6

2.Add washers (U) to the projector security legs (R). Add spacers (T) as necessary to the projector security legs (R). (See Figure 7)

6