Chief Manufacturing SL-236 Prepare the Ceiling Opening and Install the Lift, General Guidelines

Page 8

Instruction Manual

SMART-LIFT 236 Electric Ceiling Lifts

 

 

 

 

PREPARE THE CEILING OPENING AND INSTALL THE LIFT

Because of the wide variety of possible mounting situations, Chief Manufacturing can only provide general guidelines for preparing the location where the Smart-Lift will be installed. Study the following information carefully, and adapt it as necessary to fit your specific installation.

WARNING: Be especially aware of the weight of the lift, and the potential for personal injury or of damage to the lift if it is not adequately mounted. The lift (without a projector) weighs approximately 85 lbs (38.5 kg).

The “General Guidelines” below, and the information on the following pages, covers the most common mounting situa- tions:

Suspend the lift from threaded rods that secure to the structural cross brace.

Side-mount the lift to the ceiling joists or secure the lift to a wood framework mounting to the joists.

General Guidelines

Carefully determine the position of the ceiling opening and its distance from, and orientation toward, the screen.

If possible, prepare an area above the ceiling that is sufficiently larger than the lift, Leaving at least an 8” access to all sides and above the top of the lift for any future maintenance or repair.

WARNING: Improper installation can result in serious personal injury! To avoid such injury, make sure that the ceiling structural members can support a redundant weight factor five times the total weight of the equipment you intend to support overhead. If they cannot, the ceiling must be reinforced before you install the lift.

WARNING: Improper installation can result in serious injury! Plenum rated installations require electri- cally hard wiring the unit through the provided strain relief, the use of Class 2 control wiring, and all open holes in the housing (except joist tabs) must be sealed using foil tape. You must adhere to all local codes.

CAUTION: For smooth and reliable operation, the lift must be installed square and parallel in all dimensions. Avoid stressing the lift at any time during installation.

7

Image 8
Contents SMART-LIFTTM236 Electric Ceiling Lift Before YOU BeginSMART-LIFT 236 Electric Ceiling Lifts Contents Dimensional Drawing Specifications Maximum Available Space forControl AccessoriesInstallation Pretest the Lift Before Installing Support the UnitPrepare the Ceiling Opening and Install the Lift General GuidelinesInstallation in a Suspended Ceiling using threaded rods Threaded Rod InstallationInstallation in a Wood Framework or Side-Mounted to Joists Mounting LocationsPlenum Rated Installation Connect Power to the LiftNon Plenum Rated Installation Optional Installing Wiring Cover Install the Projector on the Lift Install and Route CablesAdjust the Aim of the Projector AdjustmentsAdjust Travel Outside Terminal Wiring Examples Push ButtonInternal 12VDC Power Supply 2.5A Maximum Internal 24VAC power supply, 1.2 a maxService Position Internal dry contact closuresInside Terminal Wiring Examples Internal 24VAC Power Supply, 1.2A Maximum Low Voltage SensingSmart Lift Interior Board BOX Ground Smart Lift Exterior 14 PIN AMP@125VAC AMP@60VDC Troubleshooting Left Blank Intentionally

SL-236 specifications

The Chief Manufacturing SL-236 is a versatile and innovative solution designed to enhance the way we utilize space in various environments. This sturdy and stylish mounting system is ideal for displaying flat panel screens and is particularly well-suited for commercial and educational settings, as well as home theaters.

One of the main features of the SL-236 is its exceptional build quality. Constructed from high-strength materials, this mount provides reliable support for a wide range of screen sizes, accommodating displays from 37 inches all the way up to 70 inches. The robust design ensures that the screens remain securely in place, reducing the risk of accidents or damage.

Another standout characteristic of the SL-236 is its extensive range of motion. The mount allows for tilt, pan, and lift adjustments, providing users with the flexibility to position their screens at the most optimal viewing angles. The effortless adjustment mechanisms enable quick reconfiguration for different settings or preferences, making it a user-friendly option for those who frequently adjust their display setups.

In addition to its functional attributes, the Chief Manufacturing SL-236 incorporates advanced technology to enhance performance. The mount is designed with integrated cable management solutions, keeping wires organized and minimizing clutter. This not only contributes to a cleaner aesthetic but also helps maintain the overall integrity and functionality of the display system.

Ease of installation is another significant advantage of the SL-236. The mount comes with a comprehensive installation guide and includes all necessary hardware, streamlining the process for end users. This ease of setup makes it an attractive option for both professional installers and DIY enthusiasts.

The SL-236 also boasts a sleek, modern design that can seamlessly blend into various environments. Its aesthetic appeal is complemented by its robust performance, making it a popular choice among users who prioritize both form and function.

In summary, the Chief Manufacturing SL-236 is a top-tier mounting solution that combines durability, flexibility, and user-friendly features. With its extensive range of motion, superior build quality, advanced cable management, and ease of installation, it stands out as an exemplary choice for anyone looking to optimize their viewing experience while ensuring safety and style. Whether for commercial, educational, or residential use, the SL-236 is a premier solution for modern display needs.