Cooper Lighting Lifeway II Series user manual Startup and Shutdown Procedure

Page 8

C H A P T E R 3

Startup and Shutdown Procedure

Refer to the Installation Manual to secure the unit and install AC and DC wiring.

STARTUP PROCEDURE

For the initial startup of the system, follow the instructions in the Startup and Warranty Validation Form. Failure to do so will void warranty.

CAUTION: HAZARDOUS VOLTAGES – ONLY QUALFIED SERVICE PERSONNEL SHOULD PERFORM PROCEDURE.

1.Verify that the installation switch located below the front panel is in the OFF position. Verify that AC input is disconnected.

2.Turn on the DC Circuit Breaker CB1.

3.Energize the Mains AC input by turning on the units input circuit breaker and/or the Distribution Panel breaker located upstream from the inverter.

4.Turn the installation switch to the On position. The Front Panel display should now be illuminated and a slight hum should be heard from the inverter transformer. The unit is now charging and the output should be energized.

SHUTDOWN PROCEDURE

1.Interrupt the AC Mains to the machine by the Distribution Panel Breaker or the machines input circuit breaker. The Inverter should then start.

2.Turn the installation switch located on the inverter chassis to the off position. The inverter should stop.

3.Turn off the DC Circuit Breaker CB1.

CAUTION: HAZARDOUS VOLTAGES STILL EXIST AT THE BATTERY TERMINAL BLOCK AND WITHIN THE SYSTEM. AUTHORIZED SERVICE TECHNICIANS MUST DISCHARGE DC CAPACITORS AND TURN OFF UTILITY POWER BEFORE SERVICING EQUIPMENT.

CAUTION: DO NOT LEAVE THE SYSTEM SHUTDOWN FOR A PROLONGED LENGTH OF TIME. LEAD BASED BATTERIES WILL EXPERIENCE PERMANENT DAMAGE FROM LACK OF CHARGING AFTER A FEW MONTHS.

7

113904 – System Users Manual

Image 8
Contents SURE-LITES Lifeway II Series For Your Protection Important Safeguards User’s Guide Introduction Service and Support Storage Temperature Operating TemperatureVentilation BatteriesStartup and Shutdown Procedure Battery Charging Battery PowerFault AC PresentFront Panel Display Control Panel Keypads Meter FunctionsControl Functions Program FunctionsProgram Functions Specifications Maintenance and Service Trouble Shooting Chart Return Material Authorization RMA Policy Limited Warranty

Lifeway II Series specifications

Cooper Lighting's Lifeway II Series represents a significant advancement in innovative lighting solutions designed for educational, institutional, and commercial settings. Building on the success of its predecessor, the Lifeway II series is engineered to deliver optimal performance, energy efficiency, and improved aesthetics for a variety of applications.

One of the most notable features of the Lifeway II Series is its exceptional energy efficiency. Utilizing advanced LED technology, these fixtures provide significant energy savings compared to traditional lighting solutions. The series is designed to meet or exceed energy codes, making it an environmentally friendly choice while also reducing operational costs for facilities.

The Lifeway II Series presents a range of lumen outputs and distribution patterns, allowing for versatile applications in various environments. With options for both recessed and surface-mounted installations, the series can be easily integrated into new constructions or retrofitted into existing spaces. Whether illuminating classrooms, hallways, or offices, the series offers tailored solutions to meet specific lighting needs.

In terms of technological advancements, the Lifeway II Series features advanced driver technology that ensures high efficiency and long-lasting performance. The fixtures have a rated lifespan of over 50,000 hours, which significantly reduces maintenance costs and disruptions associated with frequent bulb replacements. Moreover, the optional controls and sensor compatibility further enhance flexibility, enabling facilities to optimize their lighting conditions based on occupancy and daylight availability.

Aesthetically, the Lifeway II Series is designed with modern architectural trends in mind. The fixtures boast a sleek, unobtrusive design that blends seamlessly with contemporary interiors. Available in various color temperatures, the series allows users to choose the most suitable light quality for their space, promoting comfort and productivity.

Another essential characteristic of the Lifeway II Series is its commitment to safety and reliability. The fixtures comply with industry standards and are built to withstand the rigors of everyday use in high-traffic environments. Additionally, the series includes options for emergency lighting, ensuring that safety remains a top priority even during power outages.

In conclusion, the Cooper Lighting Lifeway II Series stands out as a leading choice for modern lighting solutions. With its focus on energy efficiency, advanced technology, versatile applications, and appealing design, it meets the diverse needs of educational and commercial facilities, setting a new standard for quality and performance in the lighting industry.