Christie Digital Systems 38-VIV301-01 Wireless Mouse mode, Projector mode, Lamp counter reset

SETTING

USB

This Projector is equipped with USB port for interactive operation

USB

between a projector and computer. Set mode following steps below.

Wireless Mouse mode

Select " " when controlling a computer with Remote Control of this projector.

Projector mode

Select " " when controlling a projector with computer.

NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruc- tion in USB driver package. Contact your authorized dealer.

Lamp counter reset

Press SELECT button at this icon to display previous items.

Move a pointer to item and then press POINT LEFT/RIGHT button(s).

Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting.

1	Turn projector on, press MENU button and ON-SCREEN
	MENU will appear. Press POINT LEFT/RIGHT button(s) to
	move a red frame pointer to SETTING Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	“Lamp counter reset” and then press SELECT button.
3	Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and
	then press SELECT button. Message "Lamp replace counter
	Reset?" is displayed. Move pointer to [Yes] and then press
	SELECT button.
	NOTE: Be sure to reset correct lamp number otherwise LAMP
	REPLACE indicator continues lighting.
4	Another confirmation dialog box appears and select [Yes] to
	reset Lamp Replace Counter.

Do not reset Lamp Replace Counter except after Projection lamp is replaced.

Quit

Closes SETTING MENU.

1 2

Move pointer to Lamp counter reset and then

press SELECT button. Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button.

Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button.

41