PREPARATION
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees.
1 | Lift the front of the projector and pull FEET LOCK |
| LATCHES on both sides of the projector. |
2 | Release FEET LOCK LATCHES to lock ADJUSTABLE |
| FEET and rotate ADJUSTABLE FEET to fine tune |
| position and tilt. |
3 | To shorten the ADJUSTABLE FEET, lift the front of the |
| projector and pull to undo FEET LOCK LATCHES. |
Position and keystone distortion of image can be adjusted using Menu Operation. (Refer to P20 and 35.)
ADJUSTABLE FEET | FEET LOCK |
| LATCHES |
MOVING PROJECTOR
Use Carry Handle when moving the Projector.
When moving the projector, replace the lens cover and retract the adjustable feet to prevent damage to the lens and cabinet.
When the projector is not in use for an extended period, put it into case (dust cover) supplied with the projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
●Do not drop or bump the projector, otherwise damages or malfunctions may result.
●When carrying the projector, use a suitable carrying case.
●Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your dealer for the best methed.
10