Christie Digital Systems 3308-VIV303-01, 38-VIV6-01 Auto PC Adjustment, PC Adjust Menu

Page 25

COMPUTER INPUT

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.


		Auto PC Adj.

1		Press MENU button and ON-SCREEN MENU will appear. Press
		POINT LEFT/RIGHT button to move a red frame pointer to PC
		ADJUST Menu icon.
2		Press POINT UP/DOWN button to move a red frame pointer to
		AUTO PC Adj. icon and then press SELECT button.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Top Control or on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P24). Refer to step 3 of MANUAL PC ADJUSTMENT section (P27).

PC ADJUST MENU

PC ADJUST Menu icon

Move a red frame pointer to AUTO PC Adj. icon and press SELECT button.

NOTE

●Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 26, 27.)

●Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “480p”, “575p”, “480i”, “575i” “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

25

Image 25

Contents Model 38-VIV306-01 To the Owner Voor de klanten in Nederland Safety InstructionsCamden Drive Cypress, CA 90630 USA CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignName of Each Part of Projector PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Positioning Projector Preparation Lens InstallationRoom Light Installing Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorConnect computer output Digital DVI-D type to this terminal Refer to P13Terminals Connecting to ComputerA Projector Connecting to Video Equipment Inside the Battery Compartment BOX Operation of Remote ControlBefore Operation Laser Pointer FunctionCompartment lid Remove batterySlide batteries into CompartmentTOP Controls and Indicators Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Used to adjust picture image Press Menu Button while connecting to PC input sourceBefore Operation Menu BAR Used to selectTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorKeystone Adjustment Adjusting ScreenFocus adjustment may not function properly if the image is Corrected by Keystone adjustmentSound Adjustment Selecting Input Source Computer InputSelecting Computer System Rgbav HdcpAuto Automatic MULTI-SCAN SystemPC System Menu Auto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Direct Picture Image SelectImage Level Select Menu Image Select MenuScreen Menu Picture Screen AdjustmentVideo Input When video input signal is connected to Video jackVideo Select VideoAuto Selecting Video SystemAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Picture level adjusted for picture with fine toneProvides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Image Adjust Menu Picture Image AdjustmentsPicture Image List Mode White balance Red Color tempWhite balance Green White balance BlueSetting Menu SettingSetting Menu Blue back AnamorphicDisplay Menu positionPower management To change the code of the Remote Control UnitRemote control To change the code of ProjectorProjector mode Wireless Mouse modeLamp counter reset Factory defaultInstallation Operating Wireless MouseOperating Wireless Mouse AppendixIndicatorIndicator MaintenanceStation Cleaning Projection Lens Appendix AIR Filter Care and CleaningRecommendation Pull up and removeLamp Replace Lamp ReplacementReset Lamp Replace Counter Message Lamp replace counter reset? is displayed. MoveAppendix Lamp Replace Counter Pointer to Yes and then press Select buttonTroubleshooting Service Appendix Indicators and Projector Condition Resolution Appendix Compatible Computer SpecificationsPC source Menu TreeSystem Setting Sound Technical Specifications Control Port Connector Appendix Configurations of TerminalsUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogTo the sales and service engineer Lens ReplacementAppendix Optional Parts Appendix Part No -A 610 316 2553 1AA6P1P4203A- ME5KL