Compaq MP2800 warranty Troubleshooting Problem Solution

Troubleshooting (continued)

Problem	Solution
Remote control does not	1. The two AAA batteries may need
operate	to be replaced.
	2. Verify that the batteries are
	installed properly.
Remote mouse does not	1. Make sure the Y-cable is
operate computer.	connected to both the computer
	and the Multimedia Adapter. Do
	not connect both the USB and
	RS232 connectors to the computer
	at the same time. The USB
	connector is the preferred
	connector.
	2. If the RS232 connection is being
	used, the remote control does not
	function until the serial port is
	initialized. You may need to
	restart the computer to initialize
	the serial port. The remote control
	Page Up and Page Down
	functions require an additional
	driver when used with the RS232
	connector. This driver can be
	found on the CD-ROM that came
	with your projector.
Compatibility issues with	Refer to Appendix B “Flash ROM
equipment attached to the	Upgrade” for more information.
projector.	If this does not resolve the problem,
	contact your Compaq authorized
	service provider or call Compaq
	Customer Support for help. Refer to
	the “Worldwide Telephone Numbers”
	booklet included in the projector
	documentation kit for a complete list of
	customer support numbers to call.

Image size is too small/large.

Adjust the manual zoom until the image is the desired size.

Troubleshooting 53