Ask Proxima C420 manual Connector Panel, Usb

Connector Panel

The projector provides three computer and three video connectors:

•one M1-D (HD, DVI, and computer)

•two VESA (HD, HD component, and computer)

•one component RCA

•one S-video

•one composite RCA

•one USB mouse (for use with the Computer 2 input only)

•one PS/2 mouse (for use with the Computer 3 input only)

It also has an RS-232 serial connector for serial control and an RJ-45 connec- tor for networked control via ProjectorNet software. The Command Line Interface (CLI) specifications and commands are on our website.

A 2.5 mm mini-jack trigger provides a 12 volt DC output. It provides a con- stant output while the projector is on. If you connect your projection screen to the trigger with an optional cable, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position. You must turn this feature on in the System menu to use it. See page 34.

	component video
external			PS/2		M1-D computer
speakers	s-video		mouse	USB		computer		screen
(audio out)							monitor
		RJ-45						trigger
				mouse		audio
						audio in
						R	trigger
			network PS/2	USB	computer 1	computer 2	monitor out
						L
						audio in computer 3	serial control
		I				computer in
		O
composite								lock
		power switch					RS232 serial control
video	power
						VESA computers
	connector
screen trigger connection			+12v
			ground

2.5mm mono plug

to screen relay (see screen manufacturer for details)

6