Ask Proxima 700 manual Using the LCD Panel, Remote Control

Page 11

USER GUIDE

LCD PANEL

5 USING THE LCD PANEL

The LCD panel has a set of connectors that you need to know in order to operate the device correctly.

5.1REMOTE CONTROL

The infrared remote control (RC) is the main user interface to the device. The RC is used to set the LCD panel correctly (to get the best possible viewing conditions) and to control the presentation.

The figure shows the different keys of the remote control.

Set-up should be done once with the application(s) you are running most frequently. Allow some minutes for the equipment to warm up before adjusting. Most settings will automatically be memorized individually for each source for future use.

10

Image 11

Contents Campus Campus User Guide LCD Panel Table of Contents User Guide LCD Panel Introduction Main FeaturesComplete set includes the following components Supplied MaterialSetting UP the LCD Panel Step Operation To SET UP from the Remote ControlVideo Remote Control Using the LCD PanelControl Function MEM Remote Control KeysConnector Function ConnectorsVGA Text FeaturesDual Safecool System SET-UP MemoryColor Multistandard TV SystemsContrast BrightnessMAC LC ResetTune BlackLCD image is completely white Practical Hints and TipsRemote control is not working Service MaintenanceGeneral Environmental Limits Technical DataDisplay Unit Compatibility Power SupplyRemote Control Mode Freq ResolutionPower ConnectorsThis connector is used as S-VHS video input Instructions to User FCC StatementRecycling / Handling Environmental StatementFredrikstad Norway Service InformationASK AS Connection Layout