USER GUIDE | LCD PANEL |
5.1COMPUTER
Connect the LCD panel, computer, monitor and power supply as shown in the rear foldout.
Connect the VGA cable (1) between the LCD panel and the computer. Use the
If you have a Macintosh, EGA, CGA or NEC computer, insert applicable adapters (4) and (5) as described in the table below.
Connect the power supply to the LCD panel (3).
APPLICABLE ADAPTERS :
COMPUTER | ADAPTER | |
VGA/SVGA | None | |
EGA/CGA* | EGA/CGA (option) | |
MACII c../v../LC/ Quadra/Powerbook/ Duo etc. | MACII (640 x 480) | |
|
| (included) |
NEC 9801 | NEC 9801(option) | |
* Computer only, monitor not available |
| |
TO SET UP FROM THE BATMOUSE REMOTE CONTROL : | ||
STEP | OPERATION |
|
1 | Press RESET for default settings |
|
2 | Adjust TUNE for a stable image |
|
3 | Press POSITION, then use cursor keys to position the image | |
4 | Adjust CONTRAST as desired |
|
8