BOXLIGHT MP-39t manual Turning on / OFF Projector, Turning on Projector, Turning OFF Projector

Page 19

BEFORE OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on pages 11~13 for connecting that equipment.)

2

Connect a projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to pages 35, 36.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. Signal from PC or Video source appears after 30 seconds.

Current Input position and Lamp mode status are also displayed on screen for 5 seconds. (Refer to "LAMP MODE" on page 36.)

Input position and

Lamp mode status

Input 1

30

Preparation Display disappears after 30 seconds.

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

Control Unit, and a message "Power off?" appears on a screen.

2

Press POWER ON-OFF button again to turn off projector. LAMP

Indicator lights bright and READY Indicator turns off. After

 

projector is turned off, Cooling Fans operate (for 90 seconds).

 

During this "Cooling Down" period, this appliance cannot be

 

turned on.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn projector on. After cooling down

completely, disconnect AC Power Cord.

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power Management” on page 35.

When WARNING TEMP. Indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, follow procedures below:

1.Press POWER ON-OFF button to turn a projector off and disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 38.)

4.Turn a projector on again.

If WARNING TEMP. Indicator should still continue to flash, call Boxlight Corporation at 1-800-762-5757 or 360-779-7901.

19

Image 19
Contents Boxlight MP-39t To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe Preparation Positioning Projector Lens Shift AdjustmentMoving Projector Preparation Adjustable FeetBNC Input Jacks Connecting ProjectorTerminals of Projector Audio Input JacksTerminals A Projector Connecting to ComputerAudio Video Connecting to Video EquipmentBefore Operation Operation of Remote ControlLaser Pointer Function Focus Button Volume ButtonWired Remote Jack Zoom ButtonReady Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning on Projector Turning on / OFF ProjectorTurning OFF Projector Keystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentSound Adjustment Selecting Input Source When Select Input 1 Computer Input TerminalsWhen Select Input 2 5 BNC Input Jacks Computer InputAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input When Select Input 3 AV TerminalsVideo Video Jack or S-VIDEO Jack Component Video Signal FormatSelecting Video System Video InputCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Setting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Order Replacement Lamp Appendix Lamp ReplacementLamp Replace Counter Troubleshooting Service Technical Specifications USB Connector Series B Appendix Configurations of TerminalsLimitation or Liability Limited WarrantyWarranty Limitation and Exclusion Disclaimer or Unstated Warranties

MP-39t specifications

The BOXLIGHT MP-39t is an innovative portable interactive projector designed to transform how educators and professionals deliver presentations and conduct lessons. Renowned for its versatility and advanced technology, the MP-39t integrates high-quality imaging with user-friendly features, making it a must-have tool for modern classrooms and meeting spaces.

One of the standout features of the MP-39t is its impressive brightness level of 3,800 ANSI lumens. This ensures that images and presentations remain clear and vibrant, even in well-lit environments. The projector supports a resolution of 1280 x 800 pixels, delivering sharp and detailed visuals that captivate audiences. Additionally, its contrast ratio of 5,000:1 enhances depth and richness in imagery, making it ideal for various content types including videos, graphs, and detailed slides.

The BOXLIGHT MP-39t is equipped with advanced interactive technology, which allows users to engage with the projected content directly. With built-in pens, users can annotate and illustrate ideas in real-time, fostering an interactive learning environment that encourages participation. The projector also supports multi-user functionality, enabling several participants to interact simultaneously with the projected material.

Connectivity options on the MP-39t are robust, featuring HDMI, USB, and VGA ports, among others, allowing seamless connectivity with laptops, tablets, and other devices. It also boasts wireless connectivity capabilities, which allow users to stream content directly without the clutter of wires. This flexibility supports various teaching styles and presentation formats, making it a suitable choice for diverse settings.

Another notable characteristic of the MP-39t is its portability. Weighing just a few pounds and compact in design, it is easy to transport and set up in different locations. The integrated speaker delivers quality audio, reducing the need for external audio equipment, which further enhances its portability.

In terms of longevity, the MP-39t uses a long-lasting LED light source that provides up to 30,000 hours of usage, drastically reducing maintenance needs. This eco-friendly projector is designed to last, making it a cost-effective investment for schools and organizations.

Overall, the BOXLIGHT MP-39t combines high-quality imaging, interactivity, portability, and connectivity, making it an exceptional choice for educators and professionals looking to enhance their presentations and learning experiences. Its wide array of features caters to the evolving needs of today’s interactive environments, making it a valuable addition to any educational or professional setting.