Adjusting the Viewing Angle, Connecting the Devices

Important

First, find a clean, flat surface to place the monitor after removing it from the stand. Place a clean dry cloth under the monitor to protect it further.

Pull the monitor slightly up and away from the stand.

English

Adjusting the Viewing Angle

The viewing angle of the monitor ranges from -5°~20°.

Connecting the Devices

Caution: Make sure that the computer and the monitor are both disconnected from the power supply.

			3	2
			3	VGA
			Audio
1	2	3	1
1			AC
			AC
AC	VGA	Audio

c	Power Code	Attach the monitor to the power cord which should then be
		inserted into a properly grounded electric socket.
d	VGA Cable	Connect the signal cable to the VGA output socket of the
	(Attached)	graphics card on the computer. Then tighten the
		thumbscrews on the connector.
e	Audio cable	Connect the audio input socket of the LCD monitor and the
	(Optional)	computer by means of the audio cable.

WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.