Connecting the Power Cord, Safety Precaution

AL1702 E-5

CONNECTING THE POWER CORD

∙Check first to make sure that the power cord you use is the correct type required for your area.

∙This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.

∙Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.

∙For unit using at 120 V AC:

Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.

∙For unit using at 220/240 V AC (outside of U.S.):

Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.

SAFETY PRECAUTION

∙Avoid placing the monitor, or any other heavy object, on the power cord to avoid damage to the cable.

∙Do not expose the monitor to rain, excessive moisture, or dust.

∙Do not cover the ventilation slots or openings of the monitor. Always put the monitor in a place where there is adequate ventilation.

∙Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the face of the monitor. Place the monitor just below eye level.

∙Handle with care when transporting the monitor.

∙Refrain from giving shock or scratch to the screen, as screen is fragile.

CLEANING YOUR MONITOR

Please carefully follow the below guidelines when cleaning the monitor.

∙Always unplug the monitor before cleaning.

∙Use a soft cloth to wipe the screen and cabinet front and sides.

∙Apply a small quantity of alcohol to a soft cloth to clean the monitor screen, if requires more than dusting.