Acer G205HV manual Installation, EN-12

Page 13

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Connect Digital Cable (Only Dual-input model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

2.Connect the Audio Cable(Only Audio-Input Model)(Optional)

3.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

4.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

5.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

Image 13

Contents Table of Contents EN-1 Special Notes on LCD MonitorsSafety instructions Information for Your Safety and ComfortSafe listening EN-2LCD Pixel Statement Product servicingTips and information for comfortable use Finding your comfort zoneDeveloping good work habits Taking care of your visionEN-4 EN-5 UnpackingAttaching / Removing the Base Screen Position AdjustmentEN-6 Safety Precaution Connecting the Power CordCleaning Your Monitor EN-7DDC Power SavingEN-8 Pin Color Display Signal Cable Connector PIN AssignmentGround Ground DDC-Serial ClockEN-10 MeaningEN-11 Standard Timing TableEN-12 InstallationEN-13 User ControlsEN-14 Acer eColor Management Operation instructionsEN-15 Adjusting the OSD settingsEN-16 EN-17 EN-18 EN-19 TroubleshootingAbnormal Sound DVI ModeEN-20 EN-21 Declaration of ConformityEN-22 Federal Communications Commission Declaration of Conformity