Acer CRT Monitor Connecting the Monitor and Swivel Base, Removing the Monitor and Swivel Base

Connecting the Monitor and Swivel Base

1.Place the monitor with its tube down on a stable surface.

2.Align the four tabs of the swivel base with the slots in the bottom of the monitor.

3.Insert the tabs into the slots of the monitor

4.Now slowly slide the swivel base toward the front of the monitor till you hear the spring lock click into place.

Removing the Monitor and Swivel Base

If you need to remove the swivel base, push the spring lock and then pull the swivel base away from the monitor.

NOTE: Special attention should be paid to the control knobs and LED indicators on the front panel when you place the monitor with its tube down. This will prevent damage to these control knobs and LED indicators from excessive pressure.

5