AV Component Hookup
See the other side of this sheet for the Speaker hookup.
With an HDMI cable you can send both audio and video with a single cable, making connecting simple and keeping wires neat.
If you have an
at HDMI IN input are output by the speakers and headphones connected to the AV receiver.
If your TV or player doesn ’t support HDMI, use the analog or digital connections shown below.
IF NO HDMI
DIGITAL | AUDIO | VIDEO | DVD player | TV |
OUT | OUT | OUT |
|
|
COAXIAL | L |
|
| VIDEO 1 |
|
|
|
| |
|
|
|
| IN |
TVR
HDMI
OUT
HDMI
IN
Please ensure the monitor input (VIDEO 1, VIDEO 2, VIDEO 3, etc.) selected corresponds to actual connection used.
DVD/BD player
HDMI
OUT
Cable/satellite receiver
Antenna input
(e.g., RF IN)
Coaxial feed from TV antenna
If you are not using cable/satellite receiver, please refer to the instruction manual.
L
COAXIAL | R |
DIGITAL VIDEO AUDIO
OUT OUT OUT
Cable/ satellite receiver
Antenna input
(e.g..RF IN)
Coaxial feed from TV antenna
If you are not using cable/satellite receiver, please refer to the instruction manual.
Using the HDMI Inputs | On the front panel |
|
If there’s no picture on your TV, you’ll need to assign the HDMI inputs as necessary using the onscreen setup menus.
If you connect your DVD/BD player to the AV receiver’s HDMI IN 1, and connect
your cable/satellite receiver to HDMI IN 3,
as shown above, it’s not necessary to change the default assignments.
Menu
1.Input Assign
2.Speaker Setup
3.Audio Adjust
4.Source Setup
5.Listening Mode Preset
6.Miscellaneous
7.Hardware Setup
8.Remote Controller Setup
9.Lock Setup
1.Input Assign
1.HDMI Input
2.Component Video Input
3.Digital Audio Input
HDMI Input | |
DVD/BD | HDMI 1 |
VCR/DVR | HDMI 2 |
CBL/SAT | HDMI 3 |
GAME | HDMI 4 |
AUX | FRONT |
Using the Digital Inputs | On the front panel |
|
If there’s no sound, you’ll need to assign the digital inputs as necessary using the setup menus on the AV receiver’s display.
If you connect your DVD player to the AV receiver’s DIGITAL IN COAXIAL 1, and your cable/satellite receiver to the DIGITAL IN COAXIAL 2, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.