Acer X222W, X221W Adjusting display settings, Switching the power, External controls

Switching the power

First, switch on the hard-switch on the backside of monitor, then turn on PC and power button on monitor’s control panel. When you see the LED on the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video signal to appear. If you do not see the green light on the power button or a video signal, check the connections.

Adjusting display settings

External controls

		If the OSD is active, press Auto to exit a selection in the OSD. If the OSD is
1	Auto	inactive, press Auto and the monitor will automatically optimize the
		position, focus, and clock of your display.
2/3 </>	Minus / Plus	If the OSD is active, press Minus or Plus to toggle between the OSD
		options. If OSD is inactive, press Minus or Plus to adjust the volume.
4	OSD	Press to view the OSD. Press again to enter a selection in the OSD.
	functions
		Power on/off
5	Power	Green: power on
		Orange: in sleep mode

6