Installation, EN-8 | Acer UM.WH6AA.002, UM.VH6AA.003 specification

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Connect the digital cable (only for Dual-Input Model).

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

Or connect HDMI Cable (Only for HDMI-Input Model)(Optional)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the HDMI cable to the computer.

1-3 Connect HDMI Cable (Only for HDMI-Input Model)(Optional)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the HDMI cable to computer. Or connect MHL cable

Or connect MHL cable(Only for MHL-Input Model)(Optional) to the portable device.

1-4 Connect the Audio Cable (Only Audio-Input Model)(Optional)

2.Connect the adapter

a Connect the AC cord to the adapter.

b Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet .

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

VGA

HDMI

DVI-D IN

VGA IN

AUDIO IN

DC-IN

*Only for MHL-Input Model