Acer X243W manual Installation, EN-12

Page 13

X243W

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.1-1 Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

1-2 Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF. b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

EN-12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Table of Contents EN-1 Special Notes on LCD MonitorsEN-2 Information for your safety and comfortEN-3 Product servicingEN-4 Taking care of your visionEN-5 UnpackingEN-6 Screen Position AdjustmentSafety Precaution Connecting the Power CordCleaning Your Monitor EN-7LED DDCEN-8 PIN no Description Connector PIN AssignmentEN-9 EN-10 Hot Plug DetectEN-11 Standard Timing TableEN-12 InstallationMenu / Enter User ControlsEN-13 User HOW to Adjust a SettingEN-14 EN-15 ∙ Adjusting the PictureEN-16 DDC/CI EN-17EN-18 LED on TroubleshootingLED OFF EN-19EN-20
Top Page Image Contents