Acer X163W manual Installation, EN-11

X163W

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1.Connect Video Cable

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA video cable to the computer.

2.Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3.Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer. This sequence is very important.

4.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.

EN-11