Display Controls | Acer 1911 guide

Setting Up the LCD Monitor

1. Turn on the LCD monitor’s hard power switch, located on the back of the monitor. (See Fig. 1-8)

2. Turn on the LCD Monitor's soft power switch, located on the bezel of the monitor.

Figure 1-8

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.

When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

Chapter 2 Display Controls

User Controls

A brief description and the location of all LCD Monitor functions control and indicator:

		Figure 2-1
1	Stereo Speakers	PC Audio Stereo output.
2	Speaker Volume Control	Increase Volume - Turn the knob clock wise.
2	Speaker Volume Control	Decrease Volume - Turn the knob counter clock wise.
		Decrease Volume - Turn the knob counter clock wise.
3	Soft Power Switch	Press the soft power switch to switch the monitor ON/OFF.
4	Power-On Indicator	LED lights Green color --- Power is ON.
4	Power-On Indicator	LED lights Yellow --- Monitor is in "Power Saving Mode".
		LED is off --- Power is OFF.
5	Function Select Buttons	Press either left or right control button for OSD (On Screen
5	Function Select Buttons	Display) menu selection.
		Display) menu selection.
6	Adjustment Control	Press the left button to decrease the OSD setting and press the
6	Buttons	right button to increase the OSD setting.
	Buttons	right button to increase the OSD setting.
7	External Headphone Jack	The monitor speakers will be disabled when using an external
7	External Headphone Jack	headphone or external speakers.
		headphone or external speakers.

Adjusting the Monitor's Display

The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments.

OSD Function Menu

To access OSD Main menu, simply press one of the Function Select control buttons, and the menu diagram will pop up on the screen as shown on Fig.

2-2:

Continue pressing the Function Select buttons to scroll through the entire menu items, then press Adjustment Control buttons to adjust content of selected item.

Figure 2-2

Attention: Firmware revision may have been updated into a latest version while the version number shown on all OSD menus in this manual will stay as Ver. 1.00.