Apple MP7730 manual Scan, Add/Erase, Reverse, START SCANNING? YesNo, Channel Erased, Channel Added

Optional Video Module

3.After leaving the menu system, press the Scan button to scan all existing channels in that region.

✓ Note: Scan function must be done for the first use in certain regions to catch all the channels in the local CATV system.

START SCANNING?

YesNo

After the “Start scanning” dialog box prompt, use the channel up/down key to select “Yes” or “No.” Press Return key to set.

Function (Must be performed with remote control unit)

Channel Select Press the channel number button user wants to select (for example, 12), then press Return key to set.

Channel Up/Down Go up and down through channels by pressing the Up/Down buttons. The channel number will appear in the lower right corner of the screen. If there is no further action for three seconds, the channel number display will disappear automatically.

		-123-
Scan
	Press the Scan button for two seconds to begin scanning TV channels.
Add/Erase	Press the Add/Erase button for two seconds to add or erase the channel. To
	delete channels from memory, press the button to erase the channel. A
	“Channel Erased” message will display. Users can also add channels to
	memory by pressing the button after selecting it. A “Channel Added” message
	will display.

Channel Erased

Channel Added

Reverse Press the Reverse button to toggle between the previous and current channels.

© 3M IPC 2000 3M™ Multimedia Projector MP7730

27