BOXLIGHT cp-305t To change the code of Projector, To change the code of the Remote Control Unit

Page 36

SETTING

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when the input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and the counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, Projection Lamp and READY Indicator are turned off. (Cooling Fans keep running.)

3.READY Indicator starts to flash after cooling down Projection Lamp for about 90 seconds (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when the input signal is connected or projector is operated with any button on Top Control or on Remote Control Unit again.

On start

When this function is “On,” projector is automatically turned on just by connecting AC Power cord to a wall outlet.

Note ; Be sure to turn projector off properly (refer to the section “TURNING OFF THE PROJECTOR” on P19). If projector is turned off in the wrong steps, On Start function does not operate properly.

Remote control

This projector has two different remote control codes; the factory-set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change the code of Projector;

Set Remote control in the SETTING MENU to “Code 2.”

To change the code of the Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing the code, make sure Remote Control operates properly.

To return to the normal code (Code 1), operate both projector and Remote Control in the ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to “ALL-OFF,” the remote transmit code automatically returns to the normal code (Code 1).

Lamp counter reset

This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 39 for operation.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

Press SELECT button at this icon to display previous items.

Move the pointer to the item and then press POINT LEFT/RIGHT button(s).

Move the pointer to Lamp counter reset and then press SELECT button. The message “Lamp replace counter reset?” is displayed.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Boxlight CP-305t To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact Design Digital Zoom for ComputerPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor Continental Europe Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Connecting Projector Terminals of ProjectorConnecting to Computer Terminals ProjectorConnecting to Video Equipment Operation of Remote Control Before OperationRemote Control Batteries Installation TOP Controls and Indicators Power ON-OFF ButtonHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorAdjusting Screen Zoom AdjustmentKeystone Adjustment Picture Freeze FunctionSound Adjustment Timer FunctionBasic Operation No Show Function Direct OperationComputer Input Selecting Input SourceSelecting Computer System AutoComputer Input Compatible Computer Specifications FreqKHz PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area Display area HFull screen Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input Selecting Video System AutoAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment ColorTint SharpnessProvides image at a normal video aspect ratio of 4 Setting Setting MenuSetting Menu To change the code of the Remote Control Unit To change the code of ProjectorOperating Wireless Mouse InstallationOperating Wireless Mouse AppendixMaintenance AIR Filter Care and CleaningCleaning Projection Lens Appendix Lamp Replacement Lamp Replace CounterTroubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Optional PartsAppendix Configurations of the Terminals USB Connector Series BLimited Warranty

cp-305t specifications

The BOXLIGHT CP-305T is a versatile and advanced interactive flat panel designed for various educational and professional settings. With its innovative features, it aims to enhance collaboration and engage users in a dynamic learning or meeting environment.

One of the standout features of the CP-305T is its 4K Ultra HD resolution. This high-definition display ensures crisp visuals and vibrant colors, making it suitable for presenting detailed information clearly. Whether in a classroom or a conference room, the clarity of the images and text enhances comprehension, allowing viewers to see intricate details from any angle.

Touch interactivity is another key characteristic of the CP-305T. The panel supports simultaneous multi-touch capability, which allows multiple users to interact with the display at once. This feature is particularly beneficial in collaborative environments, enabling students or team members to work together seamlessly on projects, brainstorm ideas, or engage in interactive lessons. The responsive touch technology ensures that users can write, draw, or navigate with ease, providing an intuitive experience.

The CP-305T also integrates various connectivity options, ensuring compatibility with multiple devices. It includes HDMI, USB, and VGA ports, allowing quick connections to laptops, tablets, and smartphones. This flexibility makes it easy for users to share content from different sources, facilitating smooth presentations and collaborative efforts without the hassle of additional converters.

Moreover, the BOXLIGHT CP-305T comes equipped with integrated tools specifically designed for educational purposes. Features such as annotation software enhance interactivity, allowing users to highlight important information, make notes, and draw directly onto the display. This functionality encourages engagement and participation, transforming traditional lessons into immersive experiences.

In terms of durability, the CP-305T includes a robust design aimed at withstanding the daily challenges of classroom or office use. The screen is built with anti-glare and scratch-resistant technology, ensuring longevity and consistent performance over time.

Overall, the BOXLIGHT CP-305T is an innovative solution that fosters interactive learning and collaboration through its striking visuals, responsive touch technology, versatile connectivity, and durable design. It stands as a prominent choice for institutions and businesses looking to enhance their presentation and collaboration capabilities in a modern, engaging way.
Top Page Image Contents