Language: allows you to select a language for the onscreen display.
Language menu
Service: To use these features, highlight them and press Select.
Factory Reset restores all settings to their default. Reset Lamp Hours resets the lamp hours used counter in the Service Info menu to zero. Do this only after changing the lamp. PIN functionality, see the next section. Test Pattern allows you to display certain patterns to adjust the image. This fea- ture only works with an optional remote. To display test patterns, click the Test Pattern check box, exit the menus, then press the Blank button on the remote. To select the patterns, use the up/down arrows on the remote or keypad. To exit the test patterns, press the Blank button again.
Service Code: only used by authorized service personnel. Service Info: provides information about the projector and lamp.
Service menu
appears only when PIN is disabled appears only when PIN is enabled
Service Info menu
33