BOXLIGHT XD-9m manual Audio Menu

Page 29

U s i n g	t h e	P r o j e c t o r

NOTE: Changing the volume

using the menu is the same as

changing it using the keypad.

Color

The color setting adjusts a video image from black and white to fully saturated color. This setting is not available for computer images.

•Press the left mouse button to decrease the amount of color in the image.

•Press the right mouse button to increase the amount of color in the image.

Sharpness

This setting adjusts the sharpness of a video image.

•Press the left mouse button to decrease the sharpness.

•Press the right mouse button to increase the sharpness.

Blank Screen

Blank Screen determines what color is displayed when there is no active source and when the projector is in standby. Click the left or right navigation button to toggle between blue and black.

Reset All

Click the left or right navigation button to reset all the options (except Language, Video Standard, Rear Projection, and Standby Time) in all the menus to their original settings.

Audio Menu

Display	> Audio >	Image Controls Language Status

Volume

FIGURE 15

Audio menu

Volume

•Press the left navigation button to decrease the volume.

•Press the right navigation button to increase the volume.

Volume adjustments you make are saved for each source.

20

Image 29

Contents Boxlight Page EN 55022 Warning Safety CertificationsFCC Warning Canada Trademarks Declaration of ConformityPage Table of Contents Index AppendixSafety Terms Safety InstructionsSafety Definitions Safety Symbols Important Operating Considerations Customer ServiceIntroduction Image ResolutionCompatibility Unpacking the ProjectorT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP the Projector T t i n g O j e c t o r Connecting a Computer Do you want to play your computer’s audio on the projector? Audio Adapter Composite video cable Audio cable Connecting a Video PlayerCable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Remote Control Using the ProjectorBasic Image Adjustment I n g O j e c t o r Adjusting the Projector Lamp on/off keypad only Using the Keypad and Remote ButtonsMenu Source keypad only Or Computer and Video remote only Standby Volume keypad onlyUsing the On-Screen Menus Brightness Display MenuContrast TintAudio Menu Keystone Image MenuOverscan Auto ImageManual Tracking Manual SyncVertical position Horizontal positionVideo Standard Controls MenuStandby Time Rear ProjectionAuto Source Select Default SourcePlug and Play Display MessagesStatus Menu Language MenuBoot version Computer resolutionLamp hours used Horizontal refresh rateI n g O j e c t o r Replacing the Projection Lamp Maintenance & TroubleshootingCleaning the Lens I n t e n a n c e Troubleshooting Removing the lamp module Using the Security Lock Replacing the Batteries in the Remote ControlProblem Color or text not being projected Troubleshooting Problem Nothing on projection screenProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image and menus are reversed left to right Problem Image is out of focusProblem no sound Problem Image is noisy or streakedCall Boxlight at 1-800-762-5757 or Problem Lamp seems to be getting dimmerProblem Lamp shuts off Appendix SpecificationsStandard Accessories ship with the projector AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook ComputerDistance to Diagonal Width Height Screen ft/m Ft/m Projected Image SizeIndex D e Page D e Limited Warranty Limitation of Liability