BOXLIGHT PREMIERE 30HD manual About the Lamp, Replacing the Lamp

Page 58

About the Lamp

The projector lamp has a life of 2000 hours. Maintain proper ventilation to keep the lamp operating throughout its lifetime. Do not subject the projector to unnecessary vibration to ensure that the lamp does not break.

„It is recommended that the lamp (sold separately) be replaced after approximately 2,000 cumulative hours of use or when you notice a significant deterioration in the picture and color quality. The number of hours the lamp has been used can be checked with “Lamp Timer” in the “Options” menu on the menu screen.

„For lamp replacement, please consult your nearest Authorized Service Center or Dealer.

„The actual lamp service life may be less than 2000 hours depending on the environment in which the projector is used.

Caution Concerning the Lamp

„This projector uses a pressurized mercury lamp. A loud sound may indicate lamp failure. Lamp failure is caused by excessive shock, improper cooling, surface scratches or deterioration of the lamp due to usage. The period of time up to failure largely varies depending on the individual lamp and/or the condition and the frequency of use. It is important to note that failure can often result in the bulb cracking.

„When the lamp replacement indicator and on-screen display icon are illuminated or are flashing, it is recommended that the lamp be replaced with a new one immediately, even if the lamp appears to be operating normally.

„If the lamp breaks glass particles may spread inside the lamp cage or gas contained in the lamp may be vented into the room from the exhaust vent. As the gas in this lamp contains mercury, ventilate the room well if the lamp breaks and avoid all exposure to the released gas. In case of exposure to the gas, consult with a doctor as soon as possible.

„If the lamp breaks, there is also a possibility that glass particles may spread inside the projector.

If this happens, it is recommended you contact your nearest Authorized Dealer to remove the damaged lamp and assure safe operation.

Replacing the Lamp

CAUTION! Do not remove the lamp unit immediately after operation of the projector. The lamp will be hot and touching it can lead to burn or injury. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit.

Appendix

56

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Premiere 30HD Home Theater Projector Page Preface EnglishPreface Product Disposal Contents Easy to Use Functions Introduction Package Contents Features Temperature indicator ComponentsUsing the Kensington Lock Projector Rear ViewRemote Control Using the Remote Control Available Range of the Remote ControlConnections and Setup Connecting the Power Cord Connecting the Projector to Other DevicesBefore Setting Up Computer usingConnecting to Video Equipment Connecting to Video EquipmentConnecting to Component Video Equipment Connecting by Using the DVI CableProjector Connecting by Using a DVI- D to Hdmi CableConnect the above cable to Connecting the Projector to a Computer Connecting to a ComputerConnecting the Thumbscrew Cables Plug and Play FunctionUsing the Adjustment Feet Adjusting the Lens Using the Lens ShiftStandard Setup Front Projection Setting up the ScreenAn Example of Standard Setup When using a wide screen When using a normal screenProjection from behind the screen Projection using a mirrorCeiling-mount setup Projecting a Reversed/Inverted ImageBasic Operation Basic OperationOutlet Basic ProcedureImage Projection PressPress on the projector to Select the Input modePress On the remote control About the Input modesBasic Operation Selecting the On-screen Display LanguageMenu Bar Items This list shows the items that can be set in the projector„ PC/Component 1&2 Mode Menu Selections Adjustments Using the Menu ScreenOperation You can adjust the projectors picture to Adjusting the PictureAdjusting Image Preferences Basic Operation Your preferences with the following picture SettingsColor Color Type Mode Select Target color from the Color TypemenuSelect Saturation from the Color Type menu Select Lightness from the Color TypemenuSelect Tint from the Color Type menu Save this setting When Auto Tune is OFF Adjusting Computer ImagesUsed to automatically adjust a Basic Operation Easy to Use Functions Selecting the Picture Display Mode Press on remote or on keypad and select layoutVideo Computer Position Function Upward or downward Main MenuKeystone in the layout Keystone FunctionSelect V-Keystone or Vertical Keystone CorrectionSetting the Power Save Selecting the Economy ModeWhite Enhance Automatic Power Off Function Source SelectSelecting a Background OSD TimeoutSetting a Background Image ImageOSD Blending Setting the Projection ModeSelect Projection Mode from Reversing/Inverting Projected ImagesDeinterlace Select Deinterlace fromReset Lamp Timer ResetFactory reset Status ScreenEasy to Use Functions Appendix Maintenance Cleaning the projectorCleaning the Ventilative Holes Cleaning Ventilative HolesAbout the Lamp Replacing the LampRemoving and Installing the Lamp Unit Follow these instructions to replace the lampRemove the lamp unit Connect the power cordReset the lamp timer Insert the new lamp unitConnecting Pin Assignments DVI-D port 25 pin connectorComputer Compatibility Chart ComputerVideo Compatibility Chart TroubleshootingAppendix Product Specifications DescriptionDimensions Units inches mmLimited Warranty

PREMIERE 30HD specifications

The BOXLIGHT PREMIERE 30HD is a remarkable addition to the world of interactive and engaging educational technology. Designed to enhance teaching and presentation experiences, this advanced projector embodies a range of high-tech features and user-friendly characteristics that cater specifically to the needs of educators, business professionals, and learners alike.

One of the standout features of the PREMIERE 30HD is its impressive brightness of 3,300 lumens, delivering vibrant and sharp images even in well-lit environments. This ensures that every presentation remains clear and legible, allowing for an effective communication of information. Furthermore, the 1080p HD resolution enhances the visual quality, providing highly detailed imagery that captivates audiences and enriches the learning experience.

In terms of connectivity, the BOXLIGHT PREMIERE 30HD offers a wealth of options, including HDMI, USB-C, and wireless capabilities, making it incredibly easy to connect a variety of devices, from laptops to smartphones. This versatility facilitates seamless integration into any classroom or meeting room setup, allowing users to choose their preferred method of display without any hassle.

The interactive features of the PREMIERE 30HD further set this projector apart from its competitors. Equipped with capabilities that enable touch interactivity, it transforms standard presentations into engaging collaborative experiences. Users can annotate and manipulate content directly on the projected surface, fostering a dynamic learning environment that encourages participation and interaction.

Moreover, the BOXLIGHT PREMIERE 30HD employs advanced DLP technology, which not only enhances color accuracy but also ensures a longer lifespan of the light source, minimizing maintenance needs and reducing total cost of ownership. Its compact and lightweight design ensures easy portability, making it an ideal solution for educators who frequently transition between different classrooms or for businesses that require on-the-go presentations.

In conclusion, the BOXLIGHT PREMIERE 30HD stands out as an innovative and versatile projector that meets the diverse needs of modern education and corporate environments. With its superior brightness, high resolution, extensive connectivity options, interactive capabilities, and advanced technology, it undeniably sets a higher standard for projectors in the market, making learning and presentations more engaging and effective.
Top Page Image Contents