Displaying a computer image
Remove the lens cap. | remove lens cap |
Press the Power button on the top of the projector or the remote.
The LED flashes green and the fans start to run. When the lamp comes on, | press Power |
| |
the startup screen is displayed and the LED is steady green. It can take a |
|
minute for the image to achieve full brightness. |
|
?No startup screen? Get help on page 17.
Turn on your computer.
turn on computer
The computer’s image should appear on the projection screen. If it doesn’t, press the Computer button on the projector’s keypad.
Make sure your laptop’s external video port is active. |
|
Many laptops do not automatically turn on their external video port when a | activate laptop’s external port |
projector is connected. Usually a key combination like FN + F5 is used to |
|
turn the external display on and off. Refer to your computer’s documenta- |
|
tion to learn your computer’s key combination. |
|
? No computer image? Try pressing the Auto Image |
|
button on the keypad. Get help on page 17. |
|
9