Ask Proxima C440/C450 manual Displaying a video image

Page 18

Displaying a video image

Remove the lens cap.	remove lens cap

Press the power switch on the back of the projector to the on position, then press the Power button on the top of the projector.

The LED flashes green and the fans start to run. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.

?No startup screen? Get help on page 19. Plug in and turn on the video device.

The video device’s image should appear on the projection screen. If it doesn’t, press the Video button on the keypad.

press Power switch press Power button

2

I	O

1

turn on video device

	Adjust the height of the projector, if necessary, by pressing the release but-	adjust height	release
	tons on each side of the projector’s front to extend the elevator feet.
			button

elevator foot

release button

elevator foot

Position the projector the desired distance from the screen at a 90 degree

angle to the screen. See page 43 for a table listing screen sizes and distances adjust distance to the screen.

16

Image 18

Contents User’s Guide Page $GREH$FUREDWSGI Trademarks Table of Contents Important Operating ConsiderationsPage Introduction AccessoriesProjector components and features back Online RegistrationConnector Panel Positioning the projector Connecting a computer Required computer connectionsOptional computer connections Visit our website for information on ProjectorNet Displaying a computer image First-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Connect BNC cables Displaying a video image You can also adjust the zoom and focus via the menus. See Shutting down the projector Troubleshooting your setupPower Save Screen SaveSolution Computer image projectedRange Out Image clear and not cropped Page Color Lamp won’t turn on, Temp LED solid red Lamp won’t turn on, Lamp LED blinking redLamp must be replaced Lamp turns on Still having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteUsing the audio Troubleshooting audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Advanced settings Settings menu Save Screen PiP Enable PiP Position Effect Key Network Maintenance Cleaning the lensChanging the lens Lamp module is on the right Resetting the lamp timer Cleaning the dust filter Using the security lockTroubleshooting Appendix Projected image sizeDistance Image Width 2.3 25/7.6 LED Behavior LED color/behavior MeaningCommand Format RS-232 commandsCommunication Configuration Setting ValueError Conditions Limitations= Japanese = Korean = Portuguese = Russian = Norwegian NND Ntsc Function Com Min Max Step Mand Fault Numerics Page XGA Limited Warranty Warranty Limitation and ExclusionLimited Warranty Period To Be Eligible For Limited Warranty CoverageTo Obtain Warranty Service If YOU Need Assistance