User’s Manual
General Settings
On the main menu screen, select the Setting item and press the OK button. You will see the Setting screen as below.
EN
●Language: This item allows users to select the displayed system language.
●Keypad Sensitivity: This item allows users to set the key sensitivity (available setting value is 1~5). The higher value indicates higher sensitivity.
●Auto Off: This item allows users to enable or disable the auto power off function of the system. If auto power off is off, the projector will be continuously on. It’s not recommend to use this setting in battery mode.
●Default: The item allows users to restore to the factory default settings.
●Lumens: This item allows users to change the lumens mode by selecting as Eco Mode or Enhanced Mode. In Eco mode the lumens in lower but also the power consumption decrease (suggest for battery mode)
●Volume Control: This item allows users to select audio output device as for Earphone or for Speaker.
●Information: This item displays the system information, including the firmware/hardware version and available space of internal memory/SD card. It’s also possible to performance a firmware update from here. For latest firmware please visit Aiptek website and follow the instructions in the update SOP provide with the firmware file.
To configure the setting:
1.Select the item and press the OK button to display the available setting options of the item.
2.Select the desired option and press the OK button. The setting will be saved automatically.
3. To discard the setting, simply press the Return (
) button. You will return to the previous screen without changing the setting.
www.aiptek.eu | Page 11 |
|
|