BenQ PB6100 user manual Maintenance

Page 30

Step 1. Turn the projector off. Discon- nect the power cord from the outlet and the projector.

Step 2. Loosen the screw and remove the lamp cover. (It is strongly rec- ommended that you use a mag- netic-head screwdriver.) If the lamp is hot, avoid burns by wait- ing 45 minutes until the lamp has cooled.

Step 3. Loosen the 3 screws. Pull the han- dle to remove the lamp housing. If the screws are not loosened completely, they could injure your fingers. Do not insert your hand into the box after the lamp is removed. If you touch the optical components inside, this could cause color unevenness in projected images.

Step 4. Replace the lamp with a new one. Insert it into the projector, and tighten the screws firmly. Loose screws may cause a bad connec- tion, which may result in mal- function.

Step 5. Re-install the lamp cover and tighten the screw. Do not turn the power on with the lamp cover removed. Whenever the lamp is replaced, reset the total lamp operation time. Do not reset if the lamp is not replaced as this could cause damage.

26 Maintenance

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Welcome Copyright DisclaimerTable of Contents Troubleshooting Important Safety Instructions Refer servicing to qualified service personnelSafety Instructions Do not block the ventilation holes Projector Features IntroductionShipping Contents Projector Description Your Projector at a GlanceExternal Control Panel Blank AutoAdjuster Remote Control Effective Range Remote Control DescriptionYour Remote Control at a Glance Remote Control FunctionsInstalling or Replacing Batteries PresetInstallation PB6200 XGA screen size chart 43 aspect ratioScreen Size PB6200 XGA screen size chart 169 aspect ratio PB6100 Svga screen size chart 43 aspect ratioConnecting to Various Equipment PB6100 Svga screen size chart 169 aspect ratioHdtv Equipment Connecting to Various Equipment Operation Start UpAuto Adjustment Digital Keystone CorrectionSource Selection Blank Menu System Brightness Contrast Phase Size Color Tint Display MenuPosition Image MenuAspect Ratio Color Temp Information System SharpnessSource Source Scan Source MenuMirror Blank Time Auto OffPreset Mode Control MenuLanguage PIP Menu Disconnect the power cord from the wall socket ShutdownLamp Replacement MaintenanceUse and Replacement of the Lamp Lamp InformationMaintenance Resetting Lamp Hours Temp InformationLED Indicator Status & Illustration Power Temp Lamp Power eventsLamp events Thermal events DealerAlternative Accessories vary from country to country Service InformationAccessories included in the standard package Optional Accessories not included in the standard packageTroubleshooting Common Problems & SolutionsChange The Lamp! Menu to enableStatus Messages HoursSpecifications Projector SpecificationsTechnical Specifications Timing Chart Resolution Sync kHz Sync Hz RemarkDimensions Warranty Limited WarrantyEEC Statement Safety RegulationsFCC Statement MIC Statement
Related manuals
Manual 122 pages 35.88 Kb

PB6100 specifications

The BenQ PB6100 is a versatile and user-friendly projector designed for both home and office use. As an entry-level projector, it provides impressive specifications, making it ideal for presentations, movie watching, and educational purposes.

One of the standout features of the BenQ PB6100 is its brightness. With a luminous output of up to 3,200 ANSI lumens, it can perform well even in well-lit environments. This ensures that images remain vibrant and clear, regardless of the ambient lighting conditions. Paired with a 2000:1 contrast ratio, the PB6100 delivers sharp and detailed images, allowing for enhanced color accuracy and depth.

The PB6100 employs DLP (Digital Light Processing) technology, which is known for its reliability and image quality. This technology utilizes a digital micromirror device that creates images with remarkable clarity and precision. The DLP design also ensures fewer maintenance issues, as it is less susceptible to dust accumulation compared to other projector types.

Another notable characteristic of the BenQ PB6100 is its resolution capability. It supports a native SVGA resolution of 800 x 600 pixels, which is suitable for basic presentations and video playback. It also supports various aspect ratios, including 4:3 and 16:9, providing flexibility depending on the content being presented.

In addition to its performance features, the PB6100 offers several connectivity options. It is equipped with multiple input ports, including VGA, USB, and composite video, allowing users to connect various devices such as laptops, desktops, and DVD players. This wide range of connections enhances the projector’s versatility in different setups.

Portability is another attribute of the BenQ PB6100. Designed to be lightweight and compact, it is easy to transport for off-site meetings or home entertainment.

The projector also has built-in speakers, which provide decent sound output, eliminating the need for additional audio equipment in casual viewing settings.

In summary, the BenQ PB6100 blends functionality with user-centric designs, making it an exceptional choice for those seeking an affordable projector without compromising on quality. Its features, such as high brightness, DLP technology, variety of connectivity options, and portable design, position it as a solid option for any user looking to enhance their visual experience.
Top Page Image Contents