Acer P1270, P1266i, P1266N, P1266P, P1166P manual Lock User Startup Screen

English

24

User password

•Press to setup or change the "User Password".

•Press number keys to set your password on the remote control and press "MENU" to confirm.

•Press to delete character.

•Enter the password when you see "Confirm Password" displayed.

•The password should be between 4 and 8 characters long.

•If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged.

•If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.

Administrator Password

The "Administrator Password" can be used in both the "Enter

Administrator Password" and "Enter Password" dialog boxes.

	•	Press	to change the "Administrator Password".
	•	The factory default of "Administrator Password" is "1234".
	If you forgot your administrator password, do the following to
	retrieve the administrator password:
	•	An unique 6-digit "Universal Password" which is printed on
		the Security Card (please check accessory in the box). This
		unique password is the number which will be accepted by
		projector anytime no matter what the Administrator
		Password is.
	•	If losing this security card and number, please contact with an
		Acer service center.
	Lock User Startup Screen
	•	Default Lock User Startup Screen is "OFF". If lock user startup
		screen is "ON", users cannot change startup screen anymore
		and avoid other users change that arbitrarily. Choose "OFF"
		to unlock startup screen.
Reset	•	Press the button after choosing "Yes" to return the
		parameters on all menus to the factory default settings.
Wireless	•	Please refer to wireless booklet for details. (For P1266i series
		only)
LAN	•	Default is "On". Choose "off" to disable LAN connection (For
		P1266n series only)
LAN IP/Mask	•	Identify IP and Mask address.