Acer H7530D Series, H7530 Series manual Pip

English

24

User password

•Press to setup or change the "User Password".

•Press number keys to set your password on the remote control and press "MENU" to confirm.

•Press to delete character.

•Enter the password when you see "Confirm Password" displayed.

•The password should be between 4 and 8 characters long.

•If you select "Request password only after plugging power cord", the projector will prompt the user to enter the password every time the power cord is plugged.

•If you select "Always request password while projector turns on", the user has to enter the password every time when the projector is turned on.

Administrator Password

The "Administrator Password" can be used in both the "Enter

Administrator Password" and "Enter Password" dialog boxes.

•Press to change the "Administrator Password".

•The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to retrieve the administrator password:

•An unique 6-digit "Universal Password" which is printed on the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is.

•If losing this security card and number, please contact with an Acer service center.

Reset	•	Press the	button and choose "Yes" to return the
		parameters on all menus to the factory default settings.
PIP	•	Choose "On" to see two screens at the same time.
	•	Choose "Off" to disable the function.
PIP Source	Press	and	to choose the secondary video source:
	Composite, S-Video or Component signal.
PIP Location	Choose the PIP secondary signal location on the display screen.
PIP Size	Choose the PIP secondary signal size on the display screen.

Note: When PIP function is activated, zoom and keystone function is unavailable.