Barco R5975039, R9002130, R9002139 owner manual Safety Instructions, On safety

Page 5

Safety Instructions

1SAFETY INSTRUCTIONS

Notice on Safety

This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No.950, which are the safety standards of information technology equipment including electrical business equipment.

WARNING

TO PREVENT FIRE OR ELECTRICAL SHOCK

HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE

These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operator against risk of electric shock and energy hazard, and having access to live parts.

Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of fire.

Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation fails.

INSTALLATION INSTRUCTIONS

Before operating this equipment please read this manual

thoroughly, and retain it for future reference.

Installation and preliminary adjustments should be performed by qualified BARCO personnel or by author- ized BARCO service dealers.

OWNER’SRECORD

The part number and serial number are located at the back side of the projector. Record these numbers in the spaces provided below. Refer to them whenever you call upon your BARCO dealer regarding this product.

PART NUMBER :

SER. NUMBER :

DEALER :

The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product may cause a risk of electrical shock to persons.

The exclamation point within a triangle is in- tended to tell the user that important operating and/or servicing instructions are included in the technical documentation for this equipment.

5975039 BARCOVISION 508 120198

FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)

This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note :

The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022.

*All the safety and operating instructions should be read before using this unit.

*The safety and operating instructions manual should be retained for future reference.

*All warnings on the equipment and in the documentation manuals should be adhered to.

*All instructions for operating and use of this equipment must be followed precisely.

On safety

1. This product should be operated from an AC power source. This projector may be connected to an IT-power system.

Operating AC power voltage of the projector:

BARCOVISION 508

Art. No. R9002130 (230V AC)

Art. No. R9002139 (120V AC)

Consult your dealer to switch over from 230Vac to 120 Vac or from 120Vac to 230 Vac.

If you are not sure of the type of AC power available, consult your dealer or local power company.

2. This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into a grounding- type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.

WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable.

(If the supplied power cable is not the correct one, consult your dealer.)

1-1

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Vision Page Date Rev Art. No 071298 R5975039 Barco Projection SystemsTable of Contents On safety Safety InstructionsOn cleaning On installationOn servicing On repackingFront Panel Terminology Location and Functions of ControlRear Panel Terminology $66 + 175Text Switching on/off Power mains cord connectionSignal input connection to the projector ConnectionsConnecting a S-Video to port Connecting a Composite Video sourceConnecting a RGB Analog source with composite sync Connecting a RF signal to the projector optional Connecting a Component sourceConnecting an IR Remote Receiver to the projector Connecting a VS05 switcher to the projectorControlling Battery installation in the RCUProjector address How to use the RCUHow to display a projector address? Press Enter to confirm your selection How to program an address into the RCU?Pause key Picture controlsSound control with the RCU optional Volume controlBass control Treble controlAdjustment mode Start UP of the Adjustment ModeCompose Overview random Access Adjustment mode Random Access Adjustment ModeStarting up the random access adjustment mode Random access adjustment mode selection menu Selecting Setup PatternPicture Tuning Internal Cross Hatch PatternGamma Color BalanceBlue stretch DecodingColor Select Geometry AdjustmentsRaster Shift Adjustment Horizontal Phase AdjustmentCorrect raster position Wrong raster position LEFT-RIGHT E-W Left-Right east-west AdjustmentsTop-Bottom north-south Adjustments Size Horizontal Size AdjustmentVertical Linearity Adjustment Ideal Image Hight Blanking AdjustmentsCorrect by pushing the control disc up or down Convergence Convergence AdjustmentStarting up the Service mode Service ModeOverview flowchart Service mode ServiceIdentification Projector Set-upProjector SET-UP IdentificationChange Password Change passwordTotal Run Time Change Projector AddressMemory management Power up modeChange baudrate Deletion of blocks Copy a blockDeleting block by block Copy a BlockDeletion of all blocks All settings to midpositionUndo all settings to midpos Undo R & B convergence mid Convergence midGreen convergence mid Undo green convergence midCRT run in cycle Common SettingsG2 Adjustment I2C Diagnostics Options Tuner kit How to activate the tuner mode ? Tuner ModeTuner mode Broadcasting System Tuner setupManual Search Auto SearchAuto Search Manual SearchOrganise Channel List Organise Channel ListBilingual sound a Teletext Insert Card

R9002130, R9002139, R5975039 specifications

Barco is a renowned leader in visualization technology, and their projectors are widely recognized for their advanced features and exceptional performance. Among their product offerings, the R5975039, R9002139, and R9002130 stand out as high-quality models designed for various applications.

The Barco R5975039 projector is specifically designed for large venues and professional events. It boasts impressive brightness levels, ensuring clear and vivid images even in well-lit environments. This model features a high resolution that supports detailed visual content, making it ideal for presentations, concerts, and large-scale exhibitions. The R5975039 incorporates advanced color processing technology, which enhances color accuracy and consistency, providing a more immersive viewing experience. With its robust design, it is built to withstand the demands of continuous operation, making it a reliable choice for demanding settings.

The Barco R9002139, on the other hand, focuses on flexibility and adaptability. Known for its modular design, this projector is configurable to meet a variety of installation needs, whether for corporate environments, educational settings, or entertainment venues. It features scalable brightness options, allowing users to adjust the intensity to suit different presentation scenarios. Equipped with multiple connectivity options, the R9002139 ensures compatibility with various devices and media formats, making it convenient for users. This model also emphasizes energy efficiency, reducing power consumption without compromising performance.

Lastly, the Barco R9002130 model excels in delivering high-resolution visuals with a focus on digital cinema applications. Its cutting-edge laser technology provides exceptional image quality and outstanding contrast ratios. The R9002130 is designed to support the latest 4K content, making it future-proof for cinema and high-end applications. Additionally, it incorporates advanced cooling systems that allow for silent operation, crucial for environments where noise levels must be minimal. The projector is also equipped with industry-leading color management tools, enabling precise calibration for different viewing environments.

Together, the Barco R5975039, R9002139, and R9002130 projectors represent the pinnacle of visual technology, each tailored to meet specific user needs while ensuring outstanding performance, versatility, and reliability. Whether for corporate use, education, or cinema applications, Barco continues to set benchmarks in the projection industry.
Top Page Image Contents