User Controls
Management
(Computer / Video
Mode)
Lamp Hour Reset
Press the 
button after choosing “Yes ”to turn the lamp hour counter to 0 hours.
Security
Press 
to start “Security” setting. You must enter “Administrator
Password” first before Security setting.
Security
This projector provides an excellent security function for the admin- istrator to manage the usage of the projector.
Select “On” to enable the security function. User have to enter password depending on the “Security Mode” defined while setting “User Password”. Please refer to “User Password” section for details.
Select “Off” then user can switch on the projector without password request.
Once the security function is enabled, the projector will request user to enter password when switch on the projector. Both “User Password” and “Adminis- trator Password” can be accepted for this dialogue.
Timeout(Min.)
