Acer P7205, P7200i, P7203 manual Using electrical power

Page 4

iv

•To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

•Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

•This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

•Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

•If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

•Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

•This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

•Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Acer Projector P7203/P7205/P7200i Series Users Guide Page Information for your safety and comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Lamps contain Mercury, Dispose Properly Disposal instructions Mercury advisoryTo protect your hearing, follow these instructions Precautions Usage NotesContents Regulations and safety notices Product Features IntroductionPackage Overview Projector Outlook Projector OverviewFront / upper side Rear side DVIControl Panel # FunctionRemote Control Layout Function Description# Icon Function Description English Connecting the Projector Getting StartedConnecting the Projector for Wireless Function InternetTurning on the Projector Turning the Projector On/OffLens cap Turning the projector off Adjusting the Height of Projected Image Adjusting the Projected ImageTo raise/lower the image How to optimize image size and distance Figure Fixed distance with different zoom and screen sizeEnglish TopHeight Top cm Vertical Lens Shift ring Horizontal 20% Adjusting the horizontal or vertical image position15% 100% 15% 20% Offset max= 15% Offset min= V x 5%Installation menu User ControlsAcer Empowering Technology Using the OSD menus Onscreen Display OSD MenusColor Image TintPIP Setting ManagementSecurity Administrator Password TimeoutMinAudio LANTimer LanguageImage Problems and Solutions TroubleshootingProblem Solution English Problems with the Projector Condition SolutionOSD Messages Condition Message ReminderLED & Alarm Definition Listing LED MessagesCleaning and replacing the dust filters Cleaning the dust filtersReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod Screw SPEC. M3 Þ 20mm Specifications DLPBelow item is for P7200i only Compatibility modes VGA AnalogDVI Digital DVI Extended Wide timing 60.0Hdmi -Digital FCC notice Operation conditionsRemarque à lintention des utilisateurs canadiens Declaration of Conformity for EU countriesRadio device regulatory notice General List of applicable countriesDeclaration of Conformity Article 3.1b EMC Federal Communications Commission Declaration of Conformity

P7203, P7205, P7200i specifications

The Acer P7200i, P7203, and P7205 projectors are part of Acer's impressive lineup of high-performance projection solutions designed primarily for business, education, and large venues. Each model showcases cutting-edge technologies that enhance image quality and usability, making them suitable for various presentation environments.

Starting with the Acer P7200i, this model stands out with its 3LCD technology, which delivers vibrant colors and excellent brightness levels. With a native resolution of WUXGA (1920 x 1200), it provides detailed visuals, making it ideal for intricate presentations and detailed graphics. The projector boasts a brightness of up to 6,000 lumens, ensuring visibility even in well-lit rooms. One of its main features is the advanced color adjustment capability, allowing users to fine-tune color settings for optimal image quality. Additionally, the P7200i includes multiple connectivity options such as HDMI, VGA, and USB ports, facilitating seamless integration with various devices.

Moving to the Acer P7203, this projector maintains many of the same high-quality attributes but is tailored for slightly different applications. The P7203 is equipped with a similar brightness and resolution, ensuring crisp and colorful images. Its unique feature is the inclusion of wireless projection capabilities, allowing users to connect devices without the need for cables, which promotes a cleaner setup and enhances mobility during presentations. Furthermore, it includes a comprehensive suite of image adjustments, ensuring that presentations look their best under any circumstances.

Finally, the Acer P7205 projector is designed for users who seek enhanced functionality and greater performance. With an even brighter output of 6,500 lumens and a superior contrast ratio, it excels in environments with high ambient light. The P7205 also supports advanced networking features, enabling multiple users to project simultaneously over a network, fostering collaboration and interactivity in classrooms and meeting rooms. Moreover, the P7205 supports multiple resolutions, making it versatile for handling various video formats and resolutions.

In summary, the Acer P7200i, P7203, and P7205 projectors offer a range of features tailored for high-quality presentations. Key characteristics include high brightness, versatile connectivity options, and advanced customization features. These models cater to different needs, ensuring that users can choose the right projector for their specific requirements. With their innovative technologies, these Acer projectors provide powerful solutions essential for engaging and impactful presentations.
Top Page Image Contents