Acer P7280I manual Using electrical power

Page 4

iv

•To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

•Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

•This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

•Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

•If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

•Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

•This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

•Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Acer Projector P7270/P7270i/P7280/P7280i Series Users Guide Page Information for your safety and comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Operating environment for using wireless function Optional Medical devicesVehicles Potentially explosive environmentsDisposal instructions Mercury advisory Precautions Usage NotesContents Regulations and safety notices Product Features IntroductionPackage Overview Projector Overview Projector OutlookFront / upper side Rear sideControl Panel Function DescriptionRemote Control Layout Icon Function DescriptionKeystone English Connecting the Projector Getting StartedInstalling the dust filter of the projector Speaker Power Connecting the Projector for Wireless FunctionInternet Turning the Projector On/Off Turning on the ProjectorTurning off the Projector Projector Overheated. Lamp will automatically turn off soonAdjusting the Projected Image Adjusting the Height of Projected ImageTo raise the image To lower the imageHow to optimize image size and distance Figure Fixed distance with different zoom and screen sizeTop Height 102 x 122 x 101 Acer Empowering Technology Empowering KeyAcer eTimer Management Acer eView ManagementUsing the OSD menus Onscreen Display OSD MenusColor setting Image setting TintEnglish Management setting Security Audio setting Administrator PasswordTimer setting PIP settingLanguage setting Image Problems and Solutions TroubleshootingProblem Solution English Problems with the Projector Condition SolutionOSD Messages Condition Message ReminderLED & Alarm Definition Listing LED MessagesCleaning and replacing the dust filters Cleaning the dust filtersReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod 145 mm 82.3 mm Specifications DLPBelow items are for P7270i/P7280i series only Compatibility modes VGA AnalogDVI Digital 60.0 75.2365.3 75.00Modes Resolution Frequency Hz Frequency KHz For TWN/USA 15.73431.469 44.955Horizontal scan rate 15k 92 kHz Hdmi -Digital50k 85 Hz FCC notice Operation conditionsRemarque à lintention des utilisateurs canadiens Declaration of Conformity for EU countriesRadio device regulatory notice General Compliant with Russian regulatory certificationEuropean Union EU List of applicable countriesFederal Communications Commission Declaration of Conformity Declaration of Conformity

P7280I specifications

The Acer P7280I is a powerful and versatile projector designed for professional and educational environments. With its high brightness, impressive resolution, and advanced connectivity options, the P7280I delivers clear and vivid images that captivate audiences.

At the heart of the Acer P7280I is a high-performance 4,000 ANSI lumens lamp that ensures bright and vibrant images even in well-lit rooms. The projector supports a native resolution of 1920 x 1200 pixels (WUXGA), making it suitable for presenting detailed images, data, and graphics. With a contrast ratio of up to 10,000:1, this projector produces deep blacks and bright whites, resulting in exceptional picture quality.

One of the standout features of the P7280I is its advanced 3D capabilities. It supports various 3D formats, allowing users to present content with an immersive visual experience. This is particularly beneficial for educational institutions where 3D models and simulations can enhance the learning experience.

The Acer P7280I also boasts a range of connectivity options, making it easy to connect to multiple devices. It includes HDMI ports, VGA inputs, and USB connections, enabling users to connect laptops, Blu-ray players, and other multimedia devices seamlessly. The inclusion of built-in wireless capabilities further simplifies presentations, allowing users to connect their mobile devices without the need for physical cables.

Another notable technology incorporated into the P7280I is Acer's ColorBoost technology, which enhances color accuracy and vibrancy. This results in lifelike and dynamic visuals that make presentations more engaging. Additionally, the projector is equipped with a DynamicBlack feature, automatically adjusting the lamp brightness to ensure optimal performance during different scenes, enhancing the overall viewing experience.

Acer has also designed the P7280I with user convenience in mind. The projector features easy-to-navigate menus and remote control functionality, making it simple to adjust settings and switch between sources. Furthermore, the P7280I's lamp life is rated at up to 5,000 hours, reducing the need for frequent replacements and lowering overall operating costs.

In summary, the Acer P7280I is an impressive projector equipped with advanced features and technologies designed to deliver top-notch performance in various settings. Its bright output, high resolution, 3D capabilities, and extensive connectivity options make it an ideal choice for anyone looking to elevate their presentations.
Top Page Image Contents