Acer P7270i, P7280i Series manual Using electrical power

Page 4

iv

•To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

•Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

•This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

•Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

•If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

•Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

•This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

•Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Acer Projector P7270/P7270i/P7280/P7280i Series Users Guide Page Information for your safety and comfort Turning the product off before cleaningUsing electrical power Additional safety information Product servicingPage Operating environment for using wireless function Optional Medical devicesVehicles Potentially explosive environmentsDisposal instructions Mercury advisory Precautions Usage NotesContents Regulations and safety notices Product Features IntroductionPackage Overview Projector Overview Projector OutlookFront / upper side Rear sideControl Panel Function DescriptionRemote Control Layout Icon Function DescriptionKeystone English Connecting the Projector Getting StartedInstalling the dust filter of the projector Speaker Power Connecting the Projector for Wireless FunctionInternet Turning the Projector On/Off Turning on the ProjectorTurning off the Projector Projector Overheated. Lamp will automatically turn off soonAdjusting the Projected Image Adjusting the Height of Projected ImageTo raise the image To lower the imageHow to optimize image size and distance Figure Fixed distance with different zoom and screen sizeTop Height 102 x 122 x 101 Acer Empowering Technology Empowering KeyAcer eTimer Management Acer eView ManagementUsing the OSD menus Onscreen Display OSD MenusColor setting Image setting TintEnglish Management setting Security Audio setting Administrator PasswordTimer setting PIP settingLanguage setting Image Problems and Solutions TroubleshootingProblem Solution English Problems with the Projector Condition SolutionOSD Messages Condition Message ReminderLED & Alarm Definition Listing LED MessagesCleaning and replacing the dust filters Cleaning the dust filtersReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod 145 mm 82.3 mm Specifications DLPBelow items are for P7270i/P7280i series only Compatibility modes VGA AnalogDVI Digital 60.0 75.2365.3 75.00Modes Resolution Frequency Hz Frequency KHz For TWN/USA 15.73431.469 44.955Horizontal scan rate 15k 92 kHz Hdmi -Digital50k 85 Hz FCC notice Operation conditionsRemarque à lintention des utilisateurs canadiens Declaration of Conformity for EU countriesRadio device regulatory notice General Compliant with Russian regulatory certificationEuropean Union EU List of applicable countriesFederal Communications Commission Declaration of Conformity Declaration of Conformity

P7280, P7270, P7280i Series, P7270i specifications

The Acer P7270i, P7280, P7280i series, and P7270 projectors stand out in the competitive projection technology market, catering especially to business and education environments. Known for their reliability and advanced features, these projectors are engineered to deliver exceptional performance with vibrant visuals and versatile connectivity options.

The Acer P7270i boasts a native resolution of 1920 x 1080 (Full HD), ensuring crisp and detailed images, making it an ideal choice for presentations and meetings. The P7280 and P7280i take this a step further with their impressive brightness levels, reaching up to 5000 ANSI lumens, which allows for clear visibility even in well-lit rooms. This high brightness, combined with a high contrast ratio, enables these projectors to produce sharp images with deep blacks and bright whites.

One of the defining characteristics of the Acer P7270i series is its advanced color technology. The projectors feature Acer's proprietary ColorBoost technology, which enhances color accuracy and vibrancy. This ensures that presentations are not only effective but visually captivating, making them suitable for both business and creative applications.

Connectivity is also a strong suit of the Acer P7270i and P7280 series. They come equipped with multiple input options, including HDMI, VGA, and USB ports. This range of connectivity facilitates easy integration with various devices such as laptops, tablets, and even smartphones. The P7280i also includes wireless connectivity capabilities, allowing for seamless presentations without the clutter of cables.

The design of the P7270i and P7280 series projectors prioritizes portability and ease of use. Their compact and lightweight form factors make them easy to transport between meeting rooms or classrooms. Furthermore, these models come with intuitive interfaces and remote controls, simplifying setup and operation.

Finally, Acer ensures longevity and maintenance efficiency through the use of long-lasting lamp technology. The high-performance lamps offer extended usage periods, reducing the need for frequent replacements and contributing to cost savings over time.

In summary, the Acer P7270i, P7280, P7280i series, and P7270 projectors combine powerful brightness, advanced color technology, versatile connectivity, and user-friendly designs. They cater to diverse presentation needs while ensuring a high-quality viewing experience, making them excellent choices for professionals and educators alike.
Top Page Image Contents