BenQ PB8220 User’s Guide
Status Messages
Description | ||
|
| |
SEARCHING | Projector is searching for input. | |
|
| |
ACQUIRING SIGNAL | Projector has identified the input signal and is running | |
the auto image adjustment function. | ||
| ||
|
| |
OUT OF RANGE | Input signal frequency exceeds the projector’s range. | |
|
| |
LAMP WARNING - | The lamp has been in operation for 1900 hours. Install a | |
CHANGE LAMP AND | new lamp for optimal performance. | |
RESET LAMP TIMER! |
| |
|
| |
OUT OF LAMP USAGE | The lamp has been in operation for 1980 hours, and the | |
TIME. YOU HAVE TO | power will turn off after 20 hours. | |
CHANGE THE LAMP! |
| |
|
| |
OUT OF LAMP USAGE | The lamp has been in operation for over 2000 hours. | |
The warning message will display for 30 seconds every 5 | ||
TIME. CHANGE THE | ||
minutes after you turn on the projector and the power | ||
LAMP! | ||
will turn off automatically after 10 minutes. | ||
| ||
|
|
26 Troubleshooting