5-3 USB Driver Upgrade Procedure
1.Set up
-Plug in power cord and then press "Power" and "Menu" button simultaneously hold on about 5 seconds, release "Power" and "Menu" button
-Once the Power ,Lamp and Temp LED light on RED at the same time, plug in USB cable into the projector and link to the USB port of a PC.
2.Execute Program
-Found new hardware wiszard will be appearred on the screen.
-Select Install the software automatically (Recommended).
-Then click Next.
3.Finish
-Click Finish to end the installation.
P3150/P3250/P3150 Refresh/P3250 Refresh/P3251 | Confidential |
|
|
5-