3M 1700 operating instructions Visual Systems Division

Page 9

All statements, technical information, and recommendations related to Seller’s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risks and liability whatsoever in connection with such use.

Any statements or recommendations of the Seller which are not contained in the Seller’s current publications shall have no force or effect unless contained in an agreement signed by an authorized officer of Seller. The statements contained herein are made in lieu of all warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose which warranties are hereby expressly disclaimed.

SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABILITY, FOR ANY INJURY OR FOR AN DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S PRODUCTS.

Visual Systems Division

 

6801 River Place Boulevard

Printed in U.S.A.

Austin, Texas 78726-9000

E3M 2/98 78-6970-7581-6 Rev. A

Image 9
Contents 1700 Part Identification List Intended USEOperating The Projector Set Up ProjectorOptical Adjustment 1708, 1720 Lamp ReplacementHigh/Low Lamp Control 1708, 1720 Cleaning TroubleshootingCountry Company Name Address Location Safety Points to Note Dust Cover Visual Systems Division