Proxima ASA Pro AV 9550 manual Basic Operation, Turning on / OFF Projector, Turning on Projector

Page 21
TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.
When Power Management function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power Management” on pages 39 and 40.
When WARNING TEMP. indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on projector again.
When WARNING TEMP. indicator continues to flash, follow procedures below:
1. Turn MAIN ON / OFF SWITCH to OFF and disconnect AC Power Cord from an AC outlet.
2. Check Air Filters for dust accumulation.
3. Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 43.)
4. Turn a projector on again.
If WARNING TEMP. indicator should still continue to flash, contact sales dealer where you purchased this projector or service center.

BASIC OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on Pages 12~15 for connecting that equipment.)

2

Connect a projector's AC Power Cord into a wall outlet and turn

MAIN ON / OFF SWITCH to ON. LAMP indicator lights RED,

 

and READY indicator lights GREEN.

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP indicator dims, and Cooling Fans start

to operate. Preparation Display appears on a screen and count- down starts. Signal from source appears after 30 seconds. Current Input position and Lamp status are also displayed on screen for 5 seconds. (Refer to "LAMP MANAGEMENT" on page 44.)

LAMP STATUS

INPUT 1

1 2

30

Preparation Display disappears after 30 seconds.

E

TURNING OFF PROJECTOR

1

Press power ON-OFF button on Top Control or on Remote

 

 

 

 

Control Unit, and a message "Power off?" appears on a screen.

 

 

 

 

2

Press power ON-OFF button again to turn off projector. LAMP

 

 

 

 

 

indicator lights bright and READY indicator turns off. After

 

 

Power off?

 

 

approximate 90 seconds, READY indicator will light green again

 

 

 

 

 

 

 

 

 

 

and projector may be turned on by pressing power ON-OFF

 

 

 

 

 

button.

 

 

 

 

3

Cooling fans will operate for approximate 2 minutes after projec-

 

 

 

 

Message disappears after 4 seconds.

tor is turned off. To power down completely, turn MAIN ON/OFF

 

 

 

 

SWITCH to OFF and disconnect AC Power Cord.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Pro AV To the Owner Voor de klanten in Nederland Safety InstructionsUL, CUL, TUV, NOM, Iram CompliancesTable of Contents Compatibility Features and DesignName of Each Part of Projector PreparationSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe Preparation Lens Installation Lens Shift AdjustmentPositioning Projector Moving Projector Preparation Picture Level and Tilt AdjustmentConnecting Projector Replacement of TerminalTerminals of Projector Input 1, 2 Connecting Projector INPUT/OUTPUT Terminals and Jacks InputAudio Output Jacks Terminals Projector Connecting to Computer2INPUT Terminals of a Projector Connecting to Video EquipmentBefore Operation TOP Controls and IndicatorsLaser Pointer Function Operation of Remote ControlRemote Control Batteries Installation HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Screen Menu Before Operation Menu BARTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorZoom Adjustment Adjusting ScreenFocus Adjustment Keystone AdjustmentTimer Function Basic Operation Picture Freeze FunctionBlank Function Direct Operation Sound AdjustmentMenu Operation Sound MenuSelecting Input Source Computer InputSelecting Computer System InputSelect Computer System Manually Computer Input Automatic MULTI-SCAN SystemAuto PC System MenuResolution Computer Input Compatible Computer SpecificationsAuto PC Adjustment PC AdjustmentPC Adjust Menu Computer InputComputer Input Manual PC Adjustment Display area Display area HFull screen Image Level Select Direct Picture Image AdjustmentImage Level Select Menu Image Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Input When Select Input 3 AV TerminalVideo Input Selecting Video SystemAuto AV System Menu Video or S-VIDEOCinema Color Video Input Image Level AdjustmentTint Noise reductionReset Reset all adjustment to previous figure Quit Setting Setting MenuSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeLamp counter reset Maintenance Operating Wireless MouseInstallation Operating Wireless MouseCleaning Projection Lens Appendix AIR Filter Care and CleaningYellow Lamp Dim Lamp Red Lamp Mark on Lamp Appendix Lamp ManagementOrder Replacement Lamp Appendix Lamp ReplacementTroubleshooting Wireless Mouse Remote Control UnitDoes not work Function does notTechnical Specifications DVI-I Terminal DIGITAL/ANALOG Appendix Configurations of TerminalsWarranty Limitation and Exclusion Limitation of Liability 2002 610 299 7033 1AA6P1P3331-- MV6FA

Pro AV 9550 specifications

Proxima ASA Pro AV 9550 is a high-performance projector tailored for a variety of professional environments, including corporate, educational, and entertainment settings. With its exceptional image quality and versatile features, the Pro AV 9550 stands out as an ideal solution for presentations, meetings, and home cinema experiences.

One of the main features of the Proxima ASA Pro AV 9550 is its impressive brightness level. With a luminous output of up to 5,500 ANSI lumens, it ensures clear and vibrant images even in well-lit rooms. This level of brightness is crucial for maintaining visual quality in large venues or spaces with ambient light, making the Pro AV 9550 a viable option for conference rooms and classrooms.

The projector utilizes advanced DLP technology, which offers remarkable color accuracy and image stability. DLP (Digital Light Processing) is known for its reliability and longevity, providing sharp images without the risk of color degradation over time. The Pro AV 9550 also features a high native resolution of 1920x1080 (Full HD), ensuring that presentations and videos are displayed with outstanding clarity.

In terms of connectivity, the Pro AV 9550 is equipped with a comprehensive range of ports, including HDMI, VGA, and USB, making it compatible with various devices such as laptops, Blu-ray players, and media streaming devices. This versatility allows users to connect effortlessly and switch between devices during presentations. Additionally, built-in wireless capabilities enable convenient screen sharing and content streaming, further enhancing its usability in collaborative environments.

The projector is designed with user-friendliness in mind. It comes with an intuitive interface and remote control, making it easy for users to navigate settings without requiring extensive technical knowledge. Moreover, the Pro AV 9550 boasts a compact and lightweight design, allowing for easy portability between different locations.

For enhanced durability, the Pro AV 9550 features a long-lasting lamp life of up to 15,000 hours in Eco Mode, reducing the frequency of lamp replacements and maintenance costs. Overall, the Proxima ASA Pro AV 9550 combines advanced technology and practical features, making it a top choice for professionals seeking high-quality projection solutions in a range of settings. Whether for educational purposes, corporate presentations, or home entertainment, the Pro AV 9550 delivers exceptional performance and reliability.
Top Page Image Contents