PYLE Audio PLVWR70IR owner manual Listening to a program

Page 11

Listening to a program

When the main unit is working, it will automatically transmit the audio signal, and then you can use the infrared headphone to listen to a program.

1.Set the volume control of the headphone to minimum then switch on the headphone. And then put on it. The length of the headphone’s band can be adjusted to your need.

2.Adjust the volume.

Slowly increase volume level. After each use, be sure to switch off the headphone to extend battery life.

ATTENTION!

Listening over headphone at high audio levels can cause hearing impairments! Also, switching on or off the headphone can cause loud clicks and pops that can impair your hearing! Therefore, always set the volume control minimum.

11

Image 11
Contents PLVWR70IR Desk-top Installation InstallationCeiling-on Installation Color Connection CAR Dome Lamp WiringBulb Specification Replacing the CAR Dome Lamp4 5 21 8 13 9 Control & Function KeysContrast Power and Power Indicator LightMonitor Bright18. AV2 Push Monitor Release Button Opening the MonitorDC 12V Input 17. AV1Infrared Headphone Operation for the headphone batteries Installing the headphone batteriesInfrared Headphone Removing the headphone batteries Check the remaining power of the headphone’ s batteryListening to a program 88-T1342-05